seal for louvre window

[islandboy]

I will be renewing my window seals on the side of the van and the three glass ones will be Claytonrite WR62.

The seal for the louvre window doesn't touch the glass but seals on the metal surround.

Can anyone let me know if the WR62 is ok for this window or do I need a different size ?

Many thanks

[Plasticman]

cant help you with that one but the seals i sell fit the louver as well as the others with no issue, ask your supplier maybe ?
mm

[Plasticman]

just looked back and we discussed this a bit ago, what have you ended up buying cos you said it was a velle originally ? and so factory glass in the sides so im confused
mm

[islandboy]

MM

I spoke to Chris at VWEmp after sending him the pictures and he said that the seals I needed were WR62 as they are the ones that take the beading. I haven't bought them yet and I,too, am now confused.

[Plasticman]

ok , take a picky of each window from about a foot away , just one corner of each will do and either pm me or post on here, we will soon have it sorted
mm

[islandboy]

corner shots

[Plasticman]

in think i see whats going on, go half as close again and also the inside close up please
mm

[islandboy]

This is about best my camera can do. Hope they help.

[Plasticman]

Im a bit concerned here, . when we discussed this earlier you said the reg doc shows it as a caravelle, sorry but all velles had factory glass and yours is a panelvan converted, maybe you should check your chassis numbers/vin etc
anyhow you defo need van conversion seals
mm

[islandboy]

Reg Doc says Caravelle

Vin NUmber: WV2ZZZ25ZHH028205

Decoder shows:

Manufacturer: Volkswagen AG
Manufacturer address: Wolfsburg/Hannover
Germany
Make: Volkswagen
Model: Transporter T3
Check digit: Z
Model year: 1987
Plant code: Germany
Sequential number:

The 25Z part only gives the possible combinations of Van/Kombi/Bus/Caravelle.

I agree, conversion seals. Can you kindly give me a price for seals and bead, delivered IOW

[Plasticman]

Yes but does your chassis mo on outrigger etc match that cos unless others Correct me then you van and the docs don't match
mm

[islandboy]

If you mean the plate inside drivers door then I will have a look. Is there anywhere else the chassis number will be ?