Exhaust silencer
Moderators: User administrators, Moderators
Exhaust silencer
Time to replace the silencer on my early 19DG. On looking at the nuts that need to be removed they look like rusted scabs, if there to far gone for a socket whats the best way to remove them. Thanks.
Re: Exhaust silencer
Chop them off with a grinder then drill out the holes and pop an M8 nut and bolt through.
Martin.
Diesel is an engine not a fuel.
I liked camping so much I went full time.
Diesel is an engine not a fuel.
I liked camping so much I went full time.
-
- Registered user
- Posts: 808
- Joined: 19 Jun 2010, 12:53
- 80-90 Mem No: 10165
- Location: coulsdon
Re: Exhaust silencer
drill 3mm hole into what is left of the flat of the nut to about .25 of the stud diameter, use larger drill to drill away side of nut, split with a chisel and peel away remains of nut,'simples'
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw Madison kit
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw Madison kit