Accelerator Pedal...

[Iceworx]

Rather an odd one this, but how should the accelerator be fixed to the floor? Mines in a bit of a state, looks like its sickoflexed in place and with a pop rivet too..

I have a new pedal from mr baxter.. but should it be screwed, bolted, or pop riveted in place?

Thanks.

[R0B]

Mines self tapped.Easier to remove should you need to.

[Iceworx]

Thanks Rob. Didnt want to remove this knackered old thing before i know how the new one should be re-atached

[Bilbo Blue]

I pop rivited a 40mm Steel hinge on mine as the bendy plastic broke.

[ringo]

Mines pop riveted most of the time - but has an annoying habit of breaking off about once a year (and when the lovely H is driving it). Its held on by a coathanger at the moment (gotta love her ingunuity) until i work out how im going to fix it permanently. I think its going to involve pop rivets then a mig welder

Ringo

[billy739]

rivoted with washers on top

factory just used large head rivots

[jake1953]

My rivets broke. Slid two bolts downthrough from the top and captive nuts underneath. A bit fidly but secure now.