Does anyone know how long the bolts are, that hold the main alternator bracket onto the engine block on 1.9 DG. This is the bracket with 2 m8 bolts under the bracket over hang. Both of mine have sheared off, so I have to try and drill and tap them out, and dont want to go through the water liner.
Thanks in anticipation.
Crisis ..............
Moderators: User administrators, Moderators
- blu trukkie
- Registered user
- Posts: 776
- Joined: 07 Oct 2005, 19:56
- 80-90 Mem No: 482
- Location: West Sussex ....
Crisis ..............
My doctor asked if any members of my family suffered from insanity, I replied, Hell no, we all kinda enjoy it.
Shoot low boys ..... they're ridin' Shetland Ponies.
Shoot low boys ..... they're ridin' Shetland Ponies.
- Steve T
- Registered user
- Posts: 163
- Joined: 05 May 2008, 10:02
- 80-90 Mem No: 5058
- Location: Salisbury, Wilts
Re: Crisis ..............
When you drill the hole for the stud extractor, drill just deep enough for the extractor to bite, but would think that the bolt would not be in deep enough to touch anything close to the water jacket so when you drill you would know when you reached the end of the bolt, there is bound to be a deeper hole than the bolt would go in if you get what I mean. Perhaps some one will post an exact answer if they had this off recently. hope this may be of help if all else fails
Steve
Steve
1984 1.9 DG Holdsworth Hi-Top
Re: Crisis ..............
Hi,
I have removed sheered bolts before by Mig welding (very quickly) a Nut to the top of the sheared bolt. This has worked on occasion to remove bolts.
Glenn.
I have removed sheered bolts before by Mig welding (very quickly) a Nut to the top of the sheared bolt. This has worked on occasion to remove bolts.
Glenn.
Life is not a rehearsal...Live life to the max....Buy a Aircooled VW and get covered in Rust and Oil.......But we all love it really....!!
- Steve T
- Registered user
- Posts: 163
- Joined: 05 May 2008, 10:02
- 80-90 Mem No: 5058
- Location: Salisbury, Wilts
Re: Crisis ..............
Just checked the vagcat site and actually shows them as studs....... possible part number 034903555B ???? it is not numbered so is just a guess, also no size or description as to what it relates to. If it is a stud would think it equall length, screwed into the block as protruding. but may go full depth
Steve
Steve
1984 1.9 DG Holdsworth Hi-Top
- blu trukkie
- Registered user
- Posts: 776
- Joined: 07 Oct 2005, 19:56
- 80-90 Mem No: 482
- Location: West Sussex ....
Re: Crisis ..............
Thanks for all the help. they are bolts in my van, and sadly, they have broken off, under flush, just to make thinks more of a pain. I bought some screw extractors today, but have to wait till monday, to get my angle drill from work.
Hopefully will get there without having to pull the engine, as I need the van next weekend.
Hopefully will get there without having to pull the engine, as I need the van next weekend.
My doctor asked if any members of my family suffered from insanity, I replied, Hell no, we all kinda enjoy it.
Shoot low boys ..... they're ridin' Shetland Ponies.
Shoot low boys ..... they're ridin' Shetland Ponies.