Gearbox / Clutch Query 1984 W/C

Post by **richnewton** » 19 Oct 2005, 19:01

Brother in law has a problem with gear selection on his 1.9. Hard to select 1st, 2nd and reverse. got trailered home with the aa guy saying he thought it was master cylinder........which is full of fluid and pumping makes little difference......any suggestions guys?????(& Girls)

Post by **lone gunman** » 19 Oct 2005, 22:48

Will it select gears with the engine off OK? if so then it might well be the clutch if not it's likely to be the linkage or (less likely I hope) the box it's self.

Post by **richnewton** » 20 Oct 2005, 18:21

yes selects gears no problem when not running.

Post by **Ivorblueun** » 27 Oct 2005, 22:38

clamp the hose (tight) just before the slave cylinder if you can depress the clutch then the master cylinder seals have gone if you can't check to see if the slave piston is working when the clutch is depressed (without clamp)get some one to hold the clutch pedal down and check the slave piston operates and doesn't return if it does return or doesn't operate then the slave seals have gone.

Post by **Blingpanzer** » 28 Oct 2005, 16:03

Similar issues on mine led to a new clutch assembly, clutch master and slave cylinders. Then it turned out that the 'box had lunched itself internally and needed a complete rebuild. The total cost - including a gear linkage rebuild to eliminate any sloppiness - was £1250.

Change the clutch master and slave cylinders first, and bleed the system through under pressure. If that doesn't work, suspect the gearbox (lunched main bearings). The Cog Box charge £680 for a complete gearbox rebuild, or GSF sell Vege recon 'boxes for just under £800.

Good luck.

Post by **richnewton** » 28 Oct 2005, 17:57

Thanks for all the help........it was the slave cylinder!