Anyone used Loctite Freeze and release spray to undo rusted so;id brake bleed nipples. Will this work or is it going to crack caliper casting or anything else detrimental.
Don't fancy heating it all up as the flexi hoses and fluid may go boom!
Thanks
Simon
Freeze & Release spray Bleed Nipples
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 36
- Joined: 11 Oct 2005, 07:11
- 80-90 Mem No: 291
- Location: Edinburgh
- "WEAZLECHIN"
- Registered user
- Posts: 233
- Joined: 13 Jan 2006, 09:58
- 80-90 Mem No: 0
- Location: j9 m6. you know, traffic jam..
brake fluid wont go boom unless its dripped onto exhaust downpipes etc then it just burns(i speak from experience), but if your going to heat the bleed nipples dont burn your rubber brake pipes!! more money. if your lucky you will unscrew the nipple, if not they break the rear slave cylinders are only £6 from gsf, but the front is NOT as cheap to rectify.