Fitted a new valve and had a faux pas where I lost about 0.5 to 1 litres of coolant...maybe less, its hard to judge
do I need to do a full system rebleed or will the heater system bleed to the header tank before the thermostat opens up to let the air into the full cooling system?
is there a quick fix......I suspect not
Full rebleed after fitting heater valve?
Moderators: User administrators, Moderators
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Full rebleed after fitting heater valve?
Id just drive it and top up as required, system is self bleeding for that amount of air
1L is not alot, syatem takes 16L, keep the heater on, i know its hot as a firemans pants but thats where the air will be
1L is not alot, syatem takes 16L, keep the heater on, i know its hot as a firemans pants but thats where the air will be
Re: Full rebleed after fitting heater valve?
Did just that. took it for an eve thrash with heater on then bled the rad on a nearby hill