Intermediate pulley oil seal renewal
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 46
- Joined: 29 Jun 2011, 08:57
- 80-90 Mem No: 0
- Location: Near Shrewsbury
Intermediate pulley oil seal renewal
I have a leak from the oil seal behind the intermediate pulley (think it drives the vacuum pump) on my JX & was wondering if it is a straightforward case of unbolting it & popping the old seal out or if its more involved & other stuff has to be removed?
Mark
JX Tin top Syncro camper
JX Tin top Syncro camper
-
- Registered user
- Posts: 798
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Intermediate pulley oil seal renewal
There are two seals a fat one and a thin one,you'll have to find a way to stop the timing belt from loosing its position on the cam,pump and crank wheels though otherwise you could end up with bent valves etc!!
While your there check the intermediate shaft bearing/s [give the shaft a wiggle up and down]
While your there check the intermediate shaft bearing/s [give the shaft a wiggle up and down]
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
-
- Registered user
- Posts: 46
- Joined: 29 Jun 2011, 08:57
- 80-90 Mem No: 0
- Location: Near Shrewsbury
Re: Intermediate pulley oil seal renewal
Thanks for the reply. I wasn't aware of the 2nd seal so thats good to know in advance
Mark
JX Tin top Syncro camper
JX Tin top Syncro camper