16" wheel centres?
Moderators: User administrators, Moderators
-
- Trader
- Posts: 3042
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: 16" wheel centres?
Just spoken to him.
Seems an ally tool just won't last, especially with glass impregnated plastic, very abrasive.
I've printed this page out and showed him a drawing, doesn't seem to think it would be a problem, but I think he had concerns over the material, do you not think ABS or similar would be better?
From memory there is a textured finish everywhere on the outside except the VW roundel? can anyone double check that?
He has a spark eroder thingy so it's no problem to produce a spark finish.
Seems an ally tool just won't last, especially with glass impregnated plastic, very abrasive.
I've printed this page out and showed him a drawing, doesn't seem to think it would be a problem, but I think he had concerns over the material, do you not think ABS or similar would be better?
From memory there is a textured finish everywhere on the outside except the VW roundel? can anyone double check that?
He has a spark eroder thingy so it's no problem to produce a spark finish.
- sandwedge
- Registered user
- Posts: 19
- Joined: 25 Aug 2009, 20:23
- 80-90 Mem No: 7352
- Location: Shropshire
Re: 16" wheel centres?
Simon Ive already spoke to Duncan, gave him enough information to quote from including materials and finishes, I will send the finished CAD once I decide who is offering the best price on tooling. I have contacted two other supplier I know so I should get a good idea of price for tooling, and moulding then from this I can work out the price per set.
Last edited by sandwedge on 03 Nov 2010, 07:53, edited 1 time in total.
-
- Registered user
- Posts: 570
- Joined: 29 Jan 2007, 00:50
- 80-90 Mem No: 3784
- Location: Blackdown Hills of Devon and Somerset
- Contact:
Re: 16" wheel centres?
Just found the receipt for my center caps.
Nice and cheap in 2006!
Nice and cheap in 2006!
1991 16" DJ (sold)
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400
- Crankin-wagen
- Registered user
- Posts: 40
- Joined: 02 Oct 2007, 20:07
- 80-90 Mem No: 4150
- Location: DUBLIN-IRELAND
- Contact:
Re: 16" wheel centres?
Just to clarify, are we talking about making caps to suit mefros OR 16 inch syncro wheels ?
because as they are different, so 2 sizes would have to be moulded. They sound like they may be costly & may easily be lost (or nicked) in a mud filled wallow hole
Most of us are probably running mefro rims for offroad use and leaving aside appearance etc. I would think that keeping the crud & muck off all the wheelnuts as well as the hubnuts would be more desirable.
Therfore why not make clips, spuds of brackets which allow use of the original VW hubcaps on mefro or indeed any steel wheel, we know do a very decent job of protecting the aforementioned nuts.
Then a chap could have shiney for best and a yellow set for offroad
Brand new original VW chrome ones 25 quid each, cheap ones 10 quid each & 5 quid each for tatty ones-lick of a rattle can
I feel sure that a simple drill a hole & pop rivet solution would be both cost effective & give a decent appearance
so come on you engineering chaps think outside the hub-nut!
Ps I have 4 of the original unmolested vw 16 plastic caps if a virgin one is required for moulding or copying
PPs if you are copying them get them moulded in yellow - it is the new black - just ask jed
because as they are different, so 2 sizes would have to be moulded. They sound like they may be costly & may easily be lost (or nicked) in a mud filled wallow hole
Most of us are probably running mefro rims for offroad use and leaving aside appearance etc. I would think that keeping the crud & muck off all the wheelnuts as well as the hubnuts would be more desirable.
Therfore why not make clips, spuds of brackets which allow use of the original VW hubcaps on mefro or indeed any steel wheel, we know do a very decent job of protecting the aforementioned nuts.
Then a chap could have shiney for best and a yellow set for offroad
Brand new original VW chrome ones 25 quid each, cheap ones 10 quid each & 5 quid each for tatty ones-lick of a rattle can
I feel sure that a simple drill a hole & pop rivet solution would be both cost effective & give a decent appearance
so come on you engineering chaps think outside the hub-nut!
Ps I have 4 of the original unmolested vw 16 plastic caps if a virgin one is required for moulding or copying
PPs if you are copying them get them moulded in yellow - it is the new black - just ask jed
-
- Trader
- Posts: 16346
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: 16" wheel centres?
You could drill the wheels to take 3 small nipples for the hubcap to snap onto. Jaguar used this mod to fit chrome hubcaps to alloy wheels on their Daimler DS420 limousines...just a thought.
-
- Trader
- Posts: 3042
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: 16" wheel centres?
Does anyone have one to hand?
If so could they take a picture of the part number and any other markings around it?
If so could they take a picture of the part number and any other markings around it?
-
- Trader
- Posts: 737
- Joined: 07 Aug 2006, 18:54
- 80-90 Mem No: 2951
- Location: Somerset....yarp!
- Contact:
Re: 16" wheel centres?
Therfore why not make clips, spuds of brackets which allow use of the original VW hubcaps on
Always banging on about the potatoes you lot..
PPs if you are copying them get them moulded in yellow - it is the new black - just ask jed
Nah, yellow is SO last year
- toomanytoys
- Trader
- Posts: 2850
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: 16" wheel centres?
I can post yer one Fri Si... or just read off/take pics of the markings.. (as long as its in the box I think it is )Simon Baxter wrote:Does anyone have one to hand?
If so could they take a picture of the part number and any other markings around it?
Ought to discuss the shifter situation too really..
-
- Registered user
- Posts: 570
- Joined: 29 Jan 2007, 00:50
- 80-90 Mem No: 3784
- Location: Blackdown Hills of Devon and Somerset
- Contact:
Re: 16" wheel centres?
I can't see any part number stamped in this one.
It is 85mm wide at the wheel, 55 mm tall, with a 50mm VW roundel on a 60mm shoulder.
The walls are 1.5mm. It is ribbed, with a thick rib by base internally.
It is 85mm wide at the wheel, 55 mm tall, with a 50mm VW roundel on a 60mm shoulder.
The walls are 1.5mm. It is ribbed, with a thick rib by base internally.
1991 16" DJ (sold)
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400
-
- Trader
- Posts: 16346
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: 16" wheel centres?
I'm not surprised they get lost, there's so little to keep them on. If they had a hexagonal pocket inside to grab the hub nut, it would be a useful addition and make them a bit more universal?
-
- Registered user
- Posts: 23
- Joined: 20 Aug 2011, 10:53
- 80-90 Mem No: 10134
- Location: anglesey
Re: 16" wheel centres?
Bit of an old thread revival, but did anyone manage anything with this; or does anyone know a good second choice?
Steve
Steve
- jebiga41
- Trader
- Posts: 722
- Joined: 15 Mar 2008, 15:50
- 80-90 Mem No: 5654
- Location: dublin ireland
- Contact:
Re: 16" wheel centres?
Have a set of brand new VW ones in the garage could be sold for the right money
VW T3/T25 and Syncro Gearbox rebuilds
http://vantopia.ie
http://vantopia.ie
-
- Trader
- Posts: 3042
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: 16" wheel centres?
I think they are available again? We did have them on the web shop.
-
- Registered user
- Posts: 23
- Joined: 20 Aug 2011, 10:53
- 80-90 Mem No: 10134
- Location: anglesey
Re: 16" wheel centres?
Simon, I had a look on there first, but couldn't find the 16" ones?
Steve
Steve
- ..lee..
- Registered user
- Posts: 733
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
Re: 16" wheel centres?
i got a full set on my shelf aswell but there a bit more costly than pauls. there a bit welsh see boyo.
it`s a big round cage and there`s too many animals in it for my liking. To help address this ring lee on 07977 765818.