Fitting LT mirrors to T3 Syncro?
Moderators: User administrators, Moderators
-
- Trader
- Posts: 3042
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: Fitting LT mirrors to T3 Syncro?
Drill the holes out in the bottom bracket, kinda bodge them on like the others do.
I've seen people take the metal arm and shorten it, that improves them a bit but, if you want them right then just buy some T3 ones, they just bolt on and work and look right.
I've seen people take the metal arm and shorten it, that improves them a bit but, if you want them right then just buy some T3 ones, they just bolt on and work and look right.
- orcecaveman
- Registered user
- Posts: 663
- Joined: 07 Oct 2005, 21:14
- 80-90 Mem No: 0
- Location: Orce, Granada.
Re: Fitting LT mirrors to T3 Syncro?
LT (folding) mirrors on a T3 just look wrong.
-
- Registered user
- Posts: 805
- Joined: 19 Jul 2010, 21:12
- 80-90 Mem No: 10610
- Location: Wiltshire
Re: Fitting LT mirrors to T3 Syncro?
Would the generic term be 'truck mirrors' ???
Syncronaut no 152
92 RHD mv panel van
94 RHD jx doka 16"
92 RHD mv panel van
94 RHD jx doka 16"
-
- Trader
- Posts: 3042
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: Fitting LT mirrors to T3 Syncro?
Sounds like a plan!
-
- Registered user
- Posts: 600
- Joined: 26 Jul 2013, 18:56
- 80-90 Mem No: 12616
- Location: Shropshire
Re: Fitting LT mirrors to T3 Syncro?
Is nothing going to be straightforward with this chuffing van?
take the road less travelled
- lloydy
- Registered user
- Posts: 8013
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: Fitting LT mirrors to T3 Syncro?
Would be if you bought the right mirrors
Put the LT ones up for sale and buy the proper ones, still available new.
Put the LT ones up for sale and buy the proper ones, still available new.
Time is a drug. Too much of it kills you
-
- Registered user
- Posts: 10
- Joined: 03 May 2011, 22:06
- 80-90 Mem No: 12414
- Location: Glasgow
Re: Fitting LT mirrors to T3 Syncro?
Just to throw another option on LT/ Syncro/ truck mirrors.
Found this post last night that claims LT bottom brackets came in 2 designs - early, flat bottom bar or late - syncro style bottom bar.
It would seem that I have the early flat bar mount option rather than the later style. So next question is, can you buy a part that converts early style bottom bar to late style bracket so that holes are aligned at correct centres or should I just fill with weld and re drill.
http://forum.club8090.co.uk/viewtopic.p ... Lt+mirrors" onclick="window.open(this.href);return false;
Found this post last night that claims LT bottom brackets came in 2 designs - early, flat bottom bar or late - syncro style bottom bar.
It would seem that I have the early flat bar mount option rather than the later style. So next question is, can you buy a part that converts early style bottom bar to late style bracket so that holes are aligned at correct centres or should I just fill with weld and re drill.
http://forum.club8090.co.uk/viewtopic.p ... Lt+mirrors" onclick="window.open(this.href);return false;
'87 Syncro Hi-Top Leisure Drive
2.2 Audi Conversion
2.2 Audi Conversion
-
- Registered user
- Posts: 117
- Joined: 12 Jul 2013, 20:05
- 80-90 Mem No: 13025
- Location: Petersfield
Re: Fitting LT mirrors to T3 Syncro?
Hello,
I'm also looking at buying some T3 truck style mirrors and with the extremely frosty mornings the heated mirrors seem a good idea, does anyone know the correct way to wire them up, is there a diagram in either (or both) the Haynes or Bentley manuals?
Thanks
I'm also looking at buying some T3 truck style mirrors and with the extremely frosty mornings the heated mirrors seem a good idea, does anyone know the correct way to wire them up, is there a diagram in either (or both) the Haynes or Bentley manuals?
Thanks
Mike
The robots are coming.
(1990 Westy Syncro 2.1 DJ - Converted from a Caravelle)
The robots are coming.
(1990 Westy Syncro 2.1 DJ - Converted from a Caravelle)
-
- Trader
- Posts: 3042
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: Fitting LT mirrors to T3 Syncro?
Wire to heater rear screen switch, I believe the wire is white with a green trace.
Obviously check a wiring diagram.
Obviously check a wiring diagram.
-
- Registered user
- Posts: 117
- Joined: 12 Jul 2013, 20:05
- 80-90 Mem No: 13025
- Location: Petersfield
Re: Fitting LT mirrors to T3 Syncro?
Thanks Simon, I'll have a look in the books but I won't be getting home until late tonight so it might a few days before I get around to checking this. If I find out, I'll post an update for others.
Mike
The robots are coming.
(1990 Westy Syncro 2.1 DJ - Converted from a Caravelle)
The robots are coming.
(1990 Westy Syncro 2.1 DJ - Converted from a Caravelle)
- orcecaveman
- Registered user
- Posts: 663
- Joined: 07 Oct 2005, 21:14
- 80-90 Mem No: 0
- Location: Orce, Granada.
Re: Fitting LT mirrors to T3 Syncro?
Got leccy ones on mine. Must get around to wiring them in (as well as my spotlights, extra gauges, aux power socket in the front, the one in the back etc etc etc.....)
-
- Registered user
- Posts: 168
- Joined: 04 Jul 2009, 15:45
- 80-90 Mem No: 0
- Location: Blaenavon City, South Wales
Re: Fitting LT mirrors to T3 Syncro?
Thread hijack
Simon when will the heated mirror be back in stock...?
Simon when will the heated mirror be back in stock...?
- syncropaddy
- Registered user
- Posts: 887
- Joined: 17 Oct 2005, 22:46
- 80-90 Mem No: 1019
- Location: Gorey, Co. Wexford, Ireland
Re: Fitting LT mirrors to T3 Syncro?
Take a feed from the HRW switch and wire them through a relay and an independent switch
syncropaddy
One Syncro, five Mercedes Benzs and a rocket ship
One Syncro, five Mercedes Benzs and a rocket ship
-
- Registered user
- Posts: 117
- Joined: 12 Jul 2013, 20:05
- 80-90 Mem No: 13025
- Location: Petersfield
Re: Fitting LT mirrors to T3 Syncro?
I've had a quick look in the Bentley and diagram 97.184 shows the door mirror heater elements spliced into the wire between the rear defogger switch and the rear defogger heat elements.
Mike
The robots are coming.
(1990 Westy Syncro 2.1 DJ - Converted from a Caravelle)
The robots are coming.
(1990 Westy Syncro 2.1 DJ - Converted from a Caravelle)
Re: Fitting LT mirrors to T3 Syncro?
Worth having a read of Cruz's excellent thread
http://forum.club8090.co.uk/viewtopic.p ... lit=mirror" onclick="window.open(this.href);return false;
http://forum.club8090.co.uk/viewtopic.p ... lit=mirror" onclick="window.open(this.href);return false;