getting my doka under 1500kg
Moderators: User administrators, Moderators
- hugomonkey
- Registered user
- Posts: 1030
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
getting my doka under 1500kg
i am looking at getting my doka under the 1500 kg mark as over here it means that i will pay about half the road tax
i have seen that you can buy grp replacement doors and i´ll make up some load bed sides in aluminium
so ,,, is it possible????
does anyone know what an afn weighs in comparison to an aaz
i have seen that you can buy grp replacement doors and i´ll make up some load bed sides in aluminium
so ,,, is it possible????
does anyone know what an afn weighs in comparison to an aaz
Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
-
- Registered user
- Posts: 85
- Joined: 03 Apr 2012, 21:16
- 80-90 Mem No: 10870
- Location: TIVERTON
Re: getting my doka under 1500kg
How much weight do you need to loose?
Alloy wheels are good start.
Sound deadening is heavy
Alloy wheels are good start.
Sound deadening is heavy
Vcds vag com diagnostics available
Snap on diagnostic available
Snap on diagnostic available
-
- Trader
- Posts: 1342
- Joined: 11 Oct 2005, 08:30
- 80-90 Mem No: 0
- Location: Barnsley...that's oop norf!
Re: getting my doka under 1500kg
hugomonkey wrote:i am looking at getting my doka under the 1500 kg mark as over here it means that i will pay about half the road tax
i have seen that you can buy grp replacement doors and i´ll make up some load bed sides in aluminium
so ,,, is it possible????
does anyone know what an afn weighs in comparison to an aaz
A Diesel Doka has an unladen weight of 1550kgs so losing 50kgs shouldn't be too much of a problem but....are you saying the road tax over there is based on a vehicles weight when it's empty...no driver,fuel etc etc?
As for the weight of an AFN compared to an AAZ...externally they're basically the same engine(except for the Diesel pump & turbo) so I can't see there being much difference in weight at all.
There's no 'r' in bought!
- hugomonkey
- Registered user
- Posts: 1030
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
Re: getting my doka under 1500kg
my doka at the moment is registered as a van meaning that there are no seats in the back but i would like to change the registration to allow me to put seats in the back, if its under 1500 kg the road tax will be about £700 pounds a year and if its over it will be about double that , that is the vehicles own weight, no driver ,no fuel or fluids all of that is deducted
Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
- toomanytoys
- Trader
- Posts: 2850
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: getting my doka under 1500kg
But what weight do they go on?? Manufacturers unladen weight or via an actual weight from a weighbridge or an official weighbridge? Has it got to stay in the same spec as that weight after ?
Could easy get it undrr by dropping front diff prop and prop bars and rear protection.. spare wheel out.. stick it on 14" 185's, quarter tank of fuel. Remove anything thats not required like aux battery..
bolt everything back on after..
if its gotta stay at 1500kg without stripping all the bits.. then thats more of a challenge.. grp cab doors..makralon side windows.. half height alloy side and rear gates.. after that.. I think weightloss might get a lot more costly...
Could easy get it undrr by dropping front diff prop and prop bars and rear protection.. spare wheel out.. stick it on 14" 185's, quarter tank of fuel. Remove anything thats not required like aux battery..
bolt everything back on after..
if its gotta stay at 1500kg without stripping all the bits.. then thats more of a challenge.. grp cab doors..makralon side windows.. half height alloy side and rear gates.. after that.. I think weightloss might get a lot more costly...
- oorwullie
- Registered user
- Posts: 543
- Joined: 11 Oct 2005, 19:56
- 80-90 Mem No: 0
- Location: fribourg, switzerland
Re: getting my doka under 1500kg
i've googled and haven't found the specific relevant info, but i didn't try in danish..........
are you sure you fully understand the regulations?i find it rather unlikely that they road tax you on the unladen weight which is what it would weigh parked and empty.
could you post a link to the DK .gov website which explains it? i can generally understand the lingo.
logical would be a tax on the maximum loaded weight which is how they do it in the swiss federal state of bern, where i am it's based on the CC of the engine and just went up 10% this year.
are you sure you fully understand the regulations?i find it rather unlikely that they road tax you on the unladen weight which is what it would weigh parked and empty.
could you post a link to the DK .gov website which explains it? i can generally understand the lingo.
logical would be a tax on the maximum loaded weight which is how they do it in the swiss federal state of bern, where i am it's based on the CC of the engine and just went up 10% this year.
ochaye thenoojimmyhaudmaheedtillastickmabunnetoanit
-
- Registered user
- Posts: 2178
- Joined: 17 Mar 2012, 23:06
- 80-90 Mem No: 11177
- Location: Cardiff
Re: getting my doka under 1500kg
Did you really say £700 a year? Blimey, I thought car tax was ridiculous over here.....
1990 2.1 DJ Syncro Caravelle/Westfalia conversion RHD
- toomanytoys
- Trader
- Posts: 2850
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: getting my doka under 1500kg
tforturton wrote:Did you really say £700 a year? Blimey, I thought car tax was ridiculous over here.....
Syncro doka would be around 1800 in Netherlands...
My car would be over 2400............................
As I have said many times in the past.. we are not so hard done by.. the press always say things are better in other countries, but reality is that it aint much different overall...
- oorwullie
- Registered user
- Posts: 543
- Joined: 11 Oct 2005, 19:56
- 80-90 Mem No: 0
- Location: fribourg, switzerland
Re: getting my doka under 1500kg
hmmmm................
it does actually seem to say unladen weight!
http://www.nysynet.dk/vagtafgift.htm" onclick="window.open(this.href);return false;
held og lykke
it does actually seem to say unladen weight!
http://www.nysynet.dk/vagtafgift.htm" onclick="window.open(this.href);return false;
held og lykke
ochaye thenoojimmyhaudmaheedtillastickmabunnetoanit
- Aidan
- Trader
- Posts: 6556
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: getting my doka under 1500kg
but is it as measured or as per Type Approval in which case it won't matter what you do to the van if the Type Approval is for 1550Kg
note that the type approval for a doka is different to a velle and that empty weight detail will be in the specification for the type approval reference number that is stamped on the Vin plate
note that the type approval for a doka is different to a velle and that empty weight detail will be in the specification for the type approval reference number that is stamped on the Vin plate
- hugomonkey
- Registered user
- Posts: 1030
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
Re: getting my doka under 1500kg
you can have the vehicle re-weighed if you make any constructional changes like another engine or fitting extra seats and changing from yellow to white plates etcAidan wrote:but is it as measured or as per Type Approval in which case it won't matter what you do to the van if the Type Approval is for 1550Kg
note that the type approval for a doka is different to a velle and that empty weight detail will be in the specification for the type approval reference number that is stamped on the Vin plate
Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
- hugomonkey
- Registered user
- Posts: 1030
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
Re: getting my doka under 1500kg
at the end of the day its either going to be expensive or even more expensive
Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
- oorwullie
- Registered user
- Posts: 543
- Joined: 11 Oct 2005, 19:56
- 80-90 Mem No: 0
- Location: fribourg, switzerland
Re: getting my doka under 1500kg
fibreglass doors were mentioned, but i'd be interested to hear whether they will be considered "safe" by the danish mot man without a crash test report by an accepted authority .
lots of vehicles here with wings,front spoilers etc that have been passing swiss mot's for years are now having to have the original factory parts re-fitted before they get the OK...........
lots of vehicles here with wings,front spoilers etc that have been passing swiss mot's for years are now having to have the original factory parts re-fitted before they get the OK...........
ochaye thenoojimmyhaudmaheedtillastickmabunnetoanit
- AdrianC
- Registered user
- Posts: 2975
- Joined: 29 Dec 2010, 21:57
- 80-90 Mem No: 9144
- Location: Living in Hay whilst the Sun pours down.
- Contact:
Re: getting my doka under 1500kg
rich broom wrote:Alloy wheels are good start.
Double-check that, though. I've had (non-VW) OEM alloys that've been MUCH heavier than the equivalent OEM steels the exact same size. I wouldn't be at all surprised to find that the lightest feasible combo was standard 14" steels and tyres.
A year and a half living in a Westy hightop... http://www.WhereverTheRoadGoes.com" onclick="window.open(this.href);return false;
- toomanytoys
- Trader
- Posts: 2850
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: getting my doka under 1500kg
probably..AdrianC wrote:rich broom wrote:Alloy wheels are good start.
Double-check that, though. I've had (non-VW) OEM alloys that've been MUCH heavier than the equivalent OEM steels the exact same size. I wouldn't be at all surprised to find that the lightest feasible combo was standard 14" steels and tyres.