16" Trailing arm Spring End plate
Moderators: User administrators, Moderators
16" Trailing arm Spring End plate
Some one said "is you rear wheel supposed to look like that?"........ehm no.....
As can be seen the trailing arm has rotten away.
Seikel.de have a cast iron spare for a second mortgage which I'll have to get, unfortunatly though they don't supply the bottom end plate the pig tail sits in... and mine is knackerred, as can be seen in the second picture....can any one help/suggest where I can get one?
Many Thanks
As can be seen the trailing arm has rotten away.
Seikel.de have a cast iron spare for a second mortgage which I'll have to get, unfortunatly though they don't supply the bottom end plate the pig tail sits in... and mine is knackerred, as can be seen in the second picture....can any one help/suggest where I can get one?
Many Thanks
14" MV Syncro Caravelle aspiring to a Westy.
16" 1.9TD Syncro Crew Cab
...and for the really narrow lanes; Honda XR250 and CRF 230.
Join the TRF......help keep the lanes open!
16" 1.9TD Syncro Crew Cab
...and for the really narrow lanes; Honda XR250 and CRF 230.
Join the TRF......help keep the lanes open!
- syncropatrick
- Registered user
- Posts: 1246
- Joined: 02 Apr 2008, 15:50
- 80-90 Mem No: 5294
- Location: North Somerset. Syncronaut #131
Re: 16" Trailing arm Spring End plate
Talk to Dai for a replacement of complete arm using obtainable parts, at less cost than Seikel.
Campervan Dehler Profi hightop Syncro 16” AGG
-
- Trader
- Posts: 3042
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: 16" Trailing arm Spring End plate
Currently on the shelf, spoken for however for a job coming up in a week or 2.
http://www.brickwerks.co.uk/index.php/t ... -pair.html" onclick="window.open(this.href);return false;
http://www.brickwerks.co.uk/index.php/t ... -pair.html" onclick="window.open(this.href);return false;
- lloydy
- Registered user
- Posts: 8013
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: 16" Trailing arm Spring End plate
i have two of these not fitted to my van at the moment.. Hotpod has them and is making copies. I Dont want to sell mine, as its not a easy part to find. But hotpod may have a repro he could sell?..... At the moment i have a T4 rubber spring perch on there, Does the job, but does deform a bit. Simon has the T4 rubber perch's
Time is a drug. Too much of it kills you
- Aidan
- Trader
- Posts: 6556
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: 16" Trailing arm Spring End plate
and there's a pair of new ones at Ian's he was going to ask foundary for a price to cast them
-
- Registered user
- Posts: 878
- Joined: 25 May 2008, 09:41
- 80-90 Mem No: 10335
- Location: folkestone, kent
Re: 16" Trailing arm Spring End plate
Still wanting these for the panel van if they become available , mine are a bit eaten . NOS would be sweet
- toomanytoys
- Trader
- Posts: 2850
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: 16" Trailing arm Spring End plate
Ok.. anyone got a single/ pair I can borrow for a quote on a cost effective replacement fabrication???
-
- Trader
- Posts: 16343
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: 16" Trailing arm Spring End plate
I've just had a firm kick up the a*** from Aidan about these. I'll get the NOS diesel ones 251 511 139B I have here back to the foundry on Friday for an up-to-date cost and lead time. Shouldn't require patterns to be made and shrinkage should be minimal (1:75 for aluminium alloys i.e. for every 75mm in any plane, you'll lose 1mm once cold) so they will fit OK without too much swearing.
I'm guessing 20 pairs as a minimum quantity.
Can't see why the 16" ones shouldn't be the same cost, if we can blast and Devcon a pair they will do as masters if there's not an original pair to hand.
I'm guessing 20 pairs as a minimum quantity.
Can't see why the 16" ones shouldn't be the same cost, if we can blast and Devcon a pair they will do as masters if there's not an original pair to hand.
-
- Registered user
- Posts: 178
- Joined: 11 Jan 2010, 10:44
- 80-90 Mem No: 7802
- Location: St Ives, Cornwall
- Contact:
Re: 16" Trailing arm Spring End plate
oops,
i got these done ages ago at a good foundry 10 miles from me. they were £20 each i think but they would be £15 each if i ordered in bulk ( like 10 pairs)
i had been meaning to fill the copies and put the locating stud onto the one which was missing it and then recast the smooth versions.
just haven't got round to it yet.
i put a pair on the camper already and there are no issues with fitting with the shrinkage.
Lloydy's on the left, copies on the right.
the wear that has been copied from Lloydys ones is presumably the result of broken pigtails at some point? that was what i was going to fill so that further copues looked like they should.
i got these done ages ago at a good foundry 10 miles from me. they were £20 each i think but they would be £15 each if i ordered in bulk ( like 10 pairs)
i had been meaning to fill the copies and put the locating stud onto the one which was missing it and then recast the smooth versions.
just haven't got round to it yet.
i put a pair on the camper already and there are no issues with fitting with the shrinkage.
Lloydy's on the left, copies on the right.
the wear that has been copied from Lloydys ones is presumably the result of broken pigtails at some point? that was what i was going to fill so that further copues looked like they should.
1992 Syncro 16" 4 door doka 1.9na diesel
1990 Syncro 16" high top Westfalia 1.9tdi
-
- Registered user
- Posts: 178
- Joined: 11 Jan 2010, 10:44
- 80-90 Mem No: 7802
- Location: St Ives, Cornwall
- Contact:
Re: 16" Trailing arm Spring End plate
and before anyone asks about the taper and thickness
Lloydy's on the top, copy on the bottom.
Lloydy's on the top, copy on the bottom.
1992 Syncro 16" 4 door doka 1.9na diesel
1990 Syncro 16" high top Westfalia 1.9tdi
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: 16" Trailing arm Spring End plate
are these a 16" specific item that acts like the deisle spacer in reverse? just wondering whats the point of them?
neil
neil
Back in the game with an uncut 2wd panel van
-
- Registered user
- Posts: 178
- Joined: 11 Jan 2010, 10:44
- 80-90 Mem No: 7802
- Location: St Ives, Cornwall
- Contact:
Re: 16" Trailing arm Spring End plate
neither of my petrol 16s had them, i think they are just to compensate for the extra weight of the diesel engines.
i have no idea if they are any different to standard ones. i thought that they were just generally hard to come by.
i have no idea if they are any different to standard ones. i thought that they were just generally hard to come by.
1992 Syncro 16" 4 door doka 1.9na diesel
1990 Syncro 16" high top Westfalia 1.9tdi
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: 16" Trailing arm Spring End plate
ok may be a diesle 16" thing as the camper (14") diesle has "diesle spacers on the rear but i cant remember if the are cast ones or some kind of plastic/nylon construction. i am also quite sure that they are located at the top of the spring.
neil
neil
Back in the game with an uncut 2wd panel van
-
- Trader
- Posts: 9017
- Joined: 09 Oct 2005, 17:31
- 80-90 Mem No: 1967
- Location: Sutton in'it Syncronaut: 123
- Contact:
Re: 16" Trailing arm Spring End plate
14" diesel syncros should have them too at the bottom of the spring or top of trailing arm really.
Jed
Jed
Re: 16" Trailing arm Spring End plate
Got this from VW dealers in Bristol, I'm guessing it's ETKA but mine doesnt work anymore.
Seems strange there is a special one for diesel?, but Diesel or Petrol I think better than nothing,
Seems strange there is a special one for diesel?, but Diesel or Petrol I think better than nothing,
14" MV Syncro Caravelle aspiring to a Westy.
16" 1.9TD Syncro Crew Cab
...and for the really narrow lanes; Honda XR250 and CRF 230.
Join the TRF......help keep the lanes open!
16" 1.9TD Syncro Crew Cab
...and for the really narrow lanes; Honda XR250 and CRF 230.
Join the TRF......help keep the lanes open!