T25 washer pump replacement

Post by **JazBee** » 23 Mar 2006, 20:14

I have an intermittent fault with the screen washers on my van and want to replace the pump. Anyone done this recently? Can you access the pump through the grill or need to drop the bottle and all the bits from below?
89 T25 1.9DG
Thanks all

Post by **dink** » 23 Mar 2006, 20:52

you need to unbolt the resovoir from under the floor, then the pump will come out of the resovoir
it's an easy enough job
i havea haynes book somewhere, i'll copy it out when i find it

Post by **syncroandy** » 23 Mar 2006, 21:14

Make sure you clean the contacts in the switch on the RH stalk, this seems to be a weak point and can result in a feeble jet. Of course nobody wants a feeble jet...

Post by **JazBee** » 24 Mar 2006, 12:23

Thanks guys. Will check out the switch before striping the pump.

Regards,

Post by **NOT ANOTHER LEAK** » 24 Mar 2006, 13:10

andys spot on.its usually the contacts on the stalk and not the pumps