Now this may sound daft.
I have fitted a 3/4 rock and roll bed which was in pieces when I got it.
It works as a seat ok, but when I pull it out as a bed it sits ok at the front but the rear is floating a few inches above the deck and needs a lump of wood to stabilise it.
Have I assembled it wrong????
rock and roll bed
Moderators: User administrators, Moderators
-
glennyboy2
- Registered user
- Posts: 38
- Joined: 16 Oct 2005, 13:00
- 80-90 Mem No: 1838
- Location: newquay,cornwall
rock and roll bed
glennyboy2
member 1838
Caroline,86 Leisuredrive Hitop, 1Y diesel
member 1838
Caroline,86 Leisuredrive Hitop, 1Y diesel
-
DiscoDave
- Registered user
- Posts: 3651
- Joined: 07 Oct 2005, 21:25
- 80-90 Mem No: 684
- Location: Harrogate North Yorkshire.
- Contact:
no that sounds about right! jk do a base that fits over the engine bay, with a bit of storage, to level out the bed! mind £100 is quite expensive for a few bits of mdf! others have made drawers to give storage and make it all the same height! at the moment i have a 4" thick piece of king span to kepp it right!!