filling my lpg tank
Moderators: User administrators, Moderators
- chickenkoop
- Registered user
- Posts: 114
- Joined: 01 Dec 2005, 20:32
- 80-90 Mem No: 2180
- Location: Whitley, COVENTRY membership No. 2180
filling my lpg tank
got a westy california,picked it up today, whilst going over the gauges for the fridge/cooker/heater, was told i need a special adaptor to fill the under floor tank in this country , it's ok on the continent it fits straight to the tank. Is this true and were do I get one, many thanks, plus think I'll take my lady camping this wkend, anything on other than volksworld?
- T'Onion
- Moderator
- Posts: 10812
- Joined: 07 Oct 2005, 17:39
- 80-90 Mem No: 255
- Location: Sheffield or 07737167005
http://www.gasure.co.uk/sales1.htm
two screwed together works on some of the wessie tanks , look at the filler , even better post up a piccie , only say this cos blurb popped around t'other day and his cal westy has a different filler ,so he will need a different adaptor that screws on the outer rather than the inner
or try ebay for the adaptors
two screwed together works on some of the wessie tanks , look at the filler , even better post up a piccie , only say this cos blurb popped around t'other day and his cal westy has a different filler ,so he will need a different adaptor that screws on the outer rather than the inner
or try ebay for the adaptors
victus in mutuo vicis
Ego mori tu mori
Ego mori tu mori
- chickenkoop
- Registered user
- Posts: 114
- Joined: 01 Dec 2005, 20:32
- 80-90 Mem No: 2180
- Location: Whitley, COVENTRY membership No. 2180
- chickenkoop
- Registered user
- Posts: 114
- Joined: 01 Dec 2005, 20:32
- 80-90 Mem No: 2180
- Location: Whitley, COVENTRY membership No. 2180
- Westy.Club.Joker
- Registered user
- Posts: 484
- Joined: 18 Sep 2006, 19:37
- 80-90 Mem No: 2863
- Location: Sunny Lancs. 1988 1.6TD Westfalia Club Joker pop-top
Gasure no longer sell or recommend the Acme type adapter as they don`t seal properly half the time.
If you look at your Westy filler, in the centre of it will be a threaded hole that the convertor (picture at top) screws into, you buy two of these so they screw together to make an extended convertor, you screw this into the westy filler and then have enough length on the adapter to get the gas filler nozzle on. Worked fine on my Club Joker
If you look at your Westy filler, in the centre of it will be a threaded hole that the convertor (picture at top) screws into, you buy two of these so they screw together to make an extended convertor, you screw this into the westy filler and then have enough length on the adapter to get the gas filler nozzle on. Worked fine on my Club Joker
Keep it real.
Search first - ask second ;>}
Search first - ask second ;>}
- T'Onion
- Moderator
- Posts: 10812
- Joined: 07 Oct 2005, 17:39
- 80-90 Mem No: 255
- Location: Sheffield or 07737167005
Westy.Club.Joker wrote: If you look at your Westy filler, in the centre of it will be a threaded hole that the convertor (picture at top) screws into, you buy two of these so they screw together to make an extended convertor, you screw this into the westy filler and then have enough length on the adapter to get the gas filler nozzle on. Worked fine on my Club Joker
not on the one blurb has on his cal westie , no thread at all in the middle
victus in mutuo vicis
Ego mori tu mori
Ego mori tu mori