Roof lining on a tin top
Moderators: User administrators, Moderators
- The_blue
- Registered user
- Posts: 310
- Joined: 22 Feb 2007, 16:01
- 80-90 Mem No: 3484
- Location: Mansfield ish.
Roof lining on a tin top
Was thinking about using the bendable MDF to make a roof lining on but '82 pannel conversion. Anyone tried it? any tips or tricks?
Was thinking that i could glue or fiberglass some lats of wood from fron to back and tacking or screwing the mdf in place.
What do you think?
Was thinking that i could glue or fiberglass some lats of wood from fron to back and tacking or screwing the mdf in place.
What do you think?
-
- Registered user
- Posts: 680
- Joined: 19 Jan 2007, 20:15
- 80-90 Mem No: 3293
- Location: north devon
hi mate i know of a good place called westcountry trimmers that do some class headlineing and trimming at a really good price might be worth giving them a ring they might be able to do something for you and send it up as your up country no web address im afraid but might be worth giving them a ring
West Country Trimmers
Pottery Road
Bovey Tracey
TQ13 9JJ(Road Map)
Devon
Tel: 01626 833722
Fax: 01626 833144
West Country Trimmers
Pottery Road
Bovey Tracey
TQ13 9JJ(Road Map)
Devon
Tel: 01626 833722
Fax: 01626 833144
-
- Registered user
- Posts: 357
- Joined: 30 Oct 2005, 20:26
- 80-90 Mem No: 1710
- Location: Bookham Surrey
I did my tin top wth 3mm hardboard then covered it with wall carpet.You need to measure a arc taken from where you can screw the board above the rear side window line on each side.Or cut a 4 inch strip for each side then pop rivet it on the board adjusting it to get a good line to screw into the sides.If you have no help to hold the board while you screw into the roof braces .A method i used was to cut a lengh of wood 3"x3" x aprox 3ft use a small trolley jack to push the wood on to the middle of the cut hardboard .This seems to form a arc on the hardboard as to allow a few self tapper screws to fix it into positionI suggest you cover it with wall carpet after its screwed becouse the carpet binds up the drill bit when its being drilled .
-
- Registered user
- Posts: 29
- Joined: 11 Oct 2005, 12:16
- 80-90 Mem No: 1106
- Location: Kilmarnock, member no 1106
I'm not sure that MDF is the way to go - condensation can gather up there especially on cold but sunny days, mdf could expand from this and leave the whole thing in a mess. I suppose if its sealed with PVA or something then that would be ok
In addition, the heat that is generated on a tin top can reach very high temps which renders most glues useless. Fibreglass would prob be the way to go, possibly using flexiply (pricey).
I thought of this a few years ago as my headlining is gross but decided against it. If you do, let us know the results
In addition, the heat that is generated on a tin top can reach very high temps which renders most glues useless. Fibreglass would prob be the way to go, possibly using flexiply (pricey).
I thought of this a few years ago as my headlining is gross but decided against it. If you do, let us know the results
- Fox McIntyre
- Registered user
- Posts: 108
- Joined: 09 Feb 2007, 14:59
- 80-90 Mem No: 3364
- Location: Bristol
-
- Registered user
- Posts: 105
- Joined: 10 Nov 2005, 17:07
- 80-90 Mem No: 2407
- Location: Glasgow Member No 2407
3mm Hardboard is the way to go. Cut it to shape, use a few rivets or srewws on each side to hold it up, prop it with 2'2's in the middle to give it a pleasing curved profile and fill the cavity with expanding foam through holes cut for purpose or those cut for lights/speakers etc. Curtain track obscures the edges well. Won't move and provides good insulation and sound deadening. Easy peasy. Saying that i'd probably have gone for a headlining if i'd known ava did them back then! Hight temp glue from woolies is good.
-
- Registered user
- Posts: 6
- Joined: 18 Mar 2007, 13:24
- 80-90 Mem No: 0
- Location: Edgware
- Contact:
roof headling
try middlesexmotorcaravans 0208 952 4045.We can supply and fit a cloth type headlining for £150
- The_blue
- Registered user
- Posts: 310
- Joined: 22 Feb 2007, 16:01
- 80-90 Mem No: 3484
- Location: Mansfield ish.
futurecut wrote:3mm Hardboard is the way to go. Cut it to shape, use a few rivets or srewws on each side to hold it up, prop it with 2'2's in the middle to give it a pleasing curved profile and fill the cavity with expanding foam through holes cut for purpose or those cut for lights/speakers etc. Curtain track obscures the edges well. Won't move and provides good insulation and sound deadening. Easy peasy. Saying that i'd probably have gone for a headlining if i'd known ava did them back then! Hight temp glue from woolies is good.
might give that a try but i'm going to add some of the silver coated bubble wrap as insulation.