Can anybody advise the best place to get a anti roll bar link?
Its the earlier type with the bend in.
Cheers all
Anti roll bar link
Moderators: User administrators, Moderators
- Bussed Up
- Registered user
- Posts: 8
- Joined: 08 Dec 2005, 22:11
- 80-90 Mem No: 1291
- Location: Aylesbury, Bucks
Anti roll bar link
1983 1.9 transporter camper
Member Number 1291
Member Number 1291
If its the one with big crank in it, rather than just a small bend, then GSF do them, as they fit Bay modesls too.
The cranked should be VW Part No. 251 411 051 (early 2WD)
251 051A (Late 2WD Straight)
The stab bar link also requires (num per side):
Top Rubber Mounting (21mm) 251 411 045 (1)
Damping Rings (rubbers either side of lower joint) 251 411 039 (2)
Spacer Sleeve 251 411 047 (1)
Nut M10 Locking (900 876 02) (1)
The cranked should be VW Part No. 251 411 051 (early 2WD)
251 051A (Late 2WD Straight)
The stab bar link also requires (num per side):
Top Rubber Mounting (21mm) 251 411 045 (1)
Damping Rings (rubbers either side of lower joint) 251 411 039 (2)
Spacer Sleeve 251 411 047 (1)
Nut M10 Locking (900 876 02) (1)
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
-
- Trader
- Posts: 836
- Joined: 11 Oct 2005, 06:36
- 80-90 Mem No: 1315
- Location: deepest devon
If its the one with big crank in it, rather than just a small bend, then GSF do them, as they fit Bay modesls too.
The cranked should be VW Part No. 251 411 051 (early 2WD)
Yes, not Bay, duff info, early T25
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1