Club 80-90 Forums

One Saturday a wave of boredom came over me and then I saw NW_VW_T25’s advert for an ‘86 single cab. I’ve not really been looking for another project but thought what the heck! It only needs an engine an gearbox right?

So I’ll build a thread of my endeavours over the next few months / years and you can all look in and be glad it’s not you!

I’m starting with this:


...and want to get to this:

thats a beautifull looking thing

So, start with the engine ...




Wilbur gave me a dg engine but it had df heads on it, don’t know why but I’m swapping them over for dg heads. Just a matter of assembling it now and parts hunting. Need a mounting bar next.

A few internal pictures, I like the idea of a bench seat upfront instead of the 2+1

It won’t be perfect, too many dents but it’s rust free and that’s ok by me.

E D I T, 'It has loads of rust on the exterior body panels'!

I have an engine mounting bar free to a good home if that's what you mean?

DF heads B suffix small valves, small inlet ports

Looking good!!!
Rust free is a definate bonus and a few dents on a single cab are just battle scars.
Watching with interest.

Cheers Bob.


I cleaned up the dg heads today, but this one looks bad.


Sent from my iPhone using Tapatalk

DoubleOSeven wrote: I cleaned up the dg heads today, but this one looks bad.


Sent from my iPhone using Tapatalk

if you mean the crack that will probably be fine, pull the valves and check it doesn't extend behind the seat

The Grand Canyon!

Everyone has their own method by I find a washer and nut is sufficient.

This piston has had a hard life, like me!

93975, any ideas what these numbers mean?

05 20?