Master cylinder

Post it here, if it doesn't fit any of the above.

Moderators: User administrators, Moderators

Post Reply
Mawsy
Registered user
Posts: 154
Joined: 23 Nov 2018, 10:12
80-90 Mem No: 0

Master cylinder

Post by Mawsy »

Hi all, I am replacing  the seals on master cylinder on 1989 Caravell, I have followed the Haynes manual, removed the circlip
and secondary piston stop, the piston is still not coming out of the unit, have I missed something  cheers Mawsy :ok

Mawsy
Registered user
Posts: 154
Joined: 23 Nov 2018, 10:12
80-90 Mem No: 0

Re: Master cylinder

Post by Mawsy »

Hi sorted, the bakerlite washer behind circlip  is about 12 mms deep ,and was corroded on to unit, fitted small socket inside piston and secured in vice and knocked cylinder free  cheers any damage to piston was outside travel through seals, cheers Mawsy :ok

Post Reply