Club 80-90 Forums

I was having a look around at 2 post car lifts, but I dont really know how heavy my vans are. tin top syncro with 5 cylinder engine, and devon Aircooled. Anyone got any ideas?  Came across single post car lifts but dont think they would be any good for a T3. Comments please

Isn't there a scrap yard near you.

Yeah, scrap yard have scales or decipher this lot...



Summary; standard van ~1.5T, Syncros ~1.6T

My Autohomes tintop weighs with the gear I normally carry 1.7T

Bay window.

I don't think that the data means didly squat, you want to know what your van weight is with the gear in as you don't want to unload it every time you work on it.

The last time I weighed my camper it was 2570kg fully loaded with a full water tank full lpg tanks and almost no petrol and me and I doubt either of yours weigh that much Geoff

1940Kg that was a Dg Devon moonraker with a super Viking top and a tank full of juicy but not loaded for camping


Sent from my iPhone using Tapatalk

have a weighbridge at work

might have a go and see what mine weighs.

trouble is its for weighing axles so do i add one to the other to get total ?
or does it not work like that 
Rick

Yes as long as its all level. If the scale is higher or lower it does not work.

Mine was 2,1 Tonne the last time I had it on a weigh bridge.

My Pritsche was only 1,9 Tonne.

Thanks guys gives me some food for thought.  The old back isnt as good as it used to be all that bending, really fancy a 2 post lift but would need to be made to use outside, i'm sure its doable. If I work on 2500kg should be ok

Make sure that the base you are bolting into is reinforced / strong enough. I have a 3.5te 2 poster, which is OK , even for a high top T25 with an interior

You do not want the lift falling over on one side, some nasty pictures on the HSE website

2.5 tonne ramp will do, but you'd be a lot safer with a 3.5 tonne one, whatever you get make sure it has good safety locks for when it is raised
you realise we'll all be coming to visit if you get your own ramp 

Aidan you are always welcome here! ramp or not