irwin mole grips
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 372
- Joined: 27 Nov 2010, 12:14
- 80-90 Mem No: 9021
- Location: liverpool
irwin mole grips
hi everyone going to get some mole grips today and seen some of the irwin vise grips.anyone used these,also there are a couple of different ones any recomendations,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988
-
- Registered user
- Posts: 85
- Joined: 03 Apr 2012, 21:16
- 80-90 Mem No: 10870
- Location: TIVERTON
Re: irwin mole grips
Yep. Use these. Good grips. Better then alot of other makes. I think better than mole grips.
Vcds vag com diagnostics available
Snap on diagnostic available
Snap on diagnostic available
-
- Registered user
- Posts: 2673
- Joined: 03 Apr 2007, 12:54
- 80-90 Mem No: 8386
- Location: Nottingham
Re: irwin mole grips
Irwin 'Vice' Grips are one of the most useful tools you can have in your tool box. I have several pairs but if I only had one then the most useful would be the 10 inch curved jaw type.
http://www.amazon.co.uk/Visegrip-10WRC- ... vise+grips" onclick="window.open(this.href);return false;
Martin
http://www.amazon.co.uk/Visegrip-10WRC- ... vise+grips" onclick="window.open(this.href);return false;
Martin
1989 California 2.1MV
-
- Registered user
- Posts: 17
- Joined: 14 Oct 2013, 22:40
- 80-90 Mem No: 0
Re: irwin mole grips
They're under a tenner in the Mytoolshed sale.
-
- Registered user
- Posts: 2673
- Joined: 03 Apr 2007, 12:54
- 80-90 Mem No: 8386
- Location: Nottingham
Re: irwin mole grips
Indeed...exactly the same price when post is added
Martin
Martin
1989 California 2.1MV
- marlinowner
- Registered user
- Posts: 1530
- Joined: 28 Jan 2014, 12:02
- 80-90 Mem No: 13646
- Location: Scottish Borders
Re: irwin mole grips
Thought I'd check what my ones were as they've always done the job. Stamped STANLEY MOLE on one side and MADE in USA on the other. I suspect they don't make them like that anymore though.
1993 SA VW T25/T3 2.5i Microbus/homebrew camper
1981/1968 Marlin Kitcar TR6 Engine
1981/1968 Marlin Kitcar TR6 Engine
-
- Registered user
- Posts: 17
- Joined: 14 Oct 2013, 22:40
- 80-90 Mem No: 0
Re: irwin mole grips
I was looking at the 10CR ones, liked the blue grips.