apologies in advance wheel question
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 64
- Joined: 23 Sep 2009, 16:14
- 80-90 Mem No: 7442
- Location: Barnsley
apologies in advance wheel question
As the title says im sorry but ive been looking for ages ive had a look in the wiki too but i am simple
could anyone tell me what spaces i would need to fit some audi 7J x 16 to my camper also where is the best place to acquire some
sorry again
Dan
could anyone tell me what spaces i would need to fit some audi 7J x 16 to my camper also where is the best place to acquire some
sorry again
Dan
- andisnewsyncro
- Registered user
- Posts: 1074
- Joined: 27 Jan 2007, 17:43
- 80-90 Mem No: 3311
- Location: Retford. North Nottinghamshire
Re: apologies in advance wheel question
It depends on the specs of the wheel, spacers can only correct an offset that is too high.
What a long strange trip it's been
-
- Registered user
- Posts: 64
- Joined: 23 Sep 2009, 16:14
- 80-90 Mem No: 7442
- Location: Barnsley
Re: apologies in advance wheel question
Thanks
so what is it i need to know please
Dan
so what is it i need to know please
Dan
-
- Registered user
- Posts: 316
- Joined: 19 Feb 2007, 16:30
- 80-90 Mem No: 3421
- Location: west midlands (3421)
Re: apologies in advance wheel question
the Et number which is stamped onto the wheels you are asking about. Varies from wheel to wheel so could not say without knowing what wheels they are.
- The Reverend Pimp Daddy
- Registered user
- Posts: 1149
- Joined: 27 Aug 2006, 10:03
- 80-90 Mem No: 3275
- Location: Cheshire
Re: apologies in advance wheel question
From memory those wheels are et45, I had 10 mm spacers on the front only to clear the suspension there was no need on the rears,....Got mine from halfords about a tenner.....just 5 stud 10mm is all you need
Re: apologies in advance wheel question
Usually Audi wheel need the centre bore machining. Far easier alloys our there like Merc alloys
- The Reverend Pimp Daddy
- Registered user
- Posts: 1149
- Joined: 27 Aug 2006, 10:03
- 80-90 Mem No: 3275
- Location: Cheshire
Re: apologies in advance wheel question
Cruz wrote:Usually Audi wheel need the centre bore machining. Far easier alloys our there like Merc alloys
Thats been done Cruz,
-
- Registered user
- Posts: 64
- Joined: 23 Sep 2009, 16:14
- 80-90 Mem No: 7442
- Location: Barnsley
Re: apologies in advance wheel question
The centres are all ready bored out just wanted to make sure i got it right first time
dont want to buy some spacers only to find out i need some different ones
Beaten to it
dont want to buy some spacers only to find out i need some different ones
Beaten to it
- The Reverend Pimp Daddy
- Registered user
- Posts: 1149
- Joined: 27 Aug 2006, 10:03
- 80-90 Mem No: 3275
- Location: Cheshire
Re: apologies in advance wheel question
lol........Any 5studs spacers will do, think they are universal fit......unless someone says i'm wrong...
-
- Registered user
- Posts: 172
- Joined: 24 Feb 2012, 22:36
- 80-90 Mem No: 10742
- Location: Plymouth
- Contact:
Re: apologies in advance wheel question
Get a multiple fit spacer you can them on eBay. They will space the wheels and they cover all configurations. I'll look for a link.
I've used them on all my old boy racer cars but they make most things fit ie 4 and 5 studs.
The only thing I'm not sure about is the centre whole size.
I've used them on all my old boy racer cars but they make most things fit ie 4 and 5 studs.
The only thing I'm not sure about is the centre whole size.
Dave.
1986 watercooled 1.9DG
1986 watercooled 1.9DG