hi
can anyone help! i have alloy wheels on my bus, and the 'centre cap cover' on the driver side has come off, i did manage to get another one but this has also been lost somewhere on the road side i have been told that i should really keep it covered or else it will damage my wheel bearings! but any ideas how to keep it on
sweetpea
advice please!
Moderators: User administrators, Moderators
- Ian Hulley
- Registered user
- Posts: 12659
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: advice please!
So long as it has the grease cap on the end of the hub covering the nut/thrust washer etc it'll be fine.
Ian
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
Re: advice please!
hi ian
its the hub that i have lost, i have another to put on but this has also come off while am driving, so at the mo am unsure of what to do, because i don't have another replacement if i do lose this one?
sweetpea
its the hub that i have lost, i have another to put on but this has also come off while am driving, so at the mo am unsure of what to do, because i don't have another replacement if i do lose this one?
sweetpea
- Ian Hulley
- Registered user
- Posts: 12659
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: advice please!
It's not the 'hub' you've lost, that has a brake disc and wheel attached to it. Yes you need to get a replacement grease cap.
Post a Wanted ad in the Wanted Forum, stating the year of your van ... hopefully one of the van dismantlers will happen across you.
Ian
Post a Wanted ad in the Wanted Forum, stating the year of your van ... hopefully one of the van dismantlers will happen across you.
Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure