I got alloys on my T25. I have been running around without a spare since put the alloys on last year. Time to get a spare!
My Alloys (have spacers) and the dimensions are 175/55/R16.
Would it be acceptable to have a standard T25 spare and try and match up the rolling radius.
Or try and match up another alloy. Though that would involve more machining in out the centre bore.
Just to add I have a LPG Tank in the spare well carrier!
Nesty
Spare Wheel
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 739
- Joined: 18 Aug 2007, 13:19
- 80-90 Mem No: 4023
- Location: Bushey, Hertfordshire
Spare Wheel
Last edited by nesty on 03 Apr 2011, 21:53, edited 1 time in total.
Holdsworth Villa2 1983 1.9 DG, 4 Speed, LPG & Petrol+underslung leisure tank
Re: Spare Wheel
A standard wheel only just fits in the carrier. I doubt an alloy would fit (unless a carat one??)
Why don't you go to a tyre size that's the same rolling radius as standard then you can use a standard steel as a spare?
I take it the alloys you have came with the wrong tyres that are fitted?
Why don't you go to a tyre size that's the same rolling radius as standard then you can use a standard steel as a spare?
I take it the alloys you have came with the wrong tyres that are fitted?
-
- Registered user
- Posts: 739
- Joined: 18 Aug 2007, 13:19
- 80-90 Mem No: 4023
- Location: Bushey, Hertfordshire
Re: Spare Wheel
Hi Cruz
I have amended my original post. I have a LPG tank in my spare wheel carrier.
Any spare will be going in the back secured by belts!
I got Mille Miglias on my van and they are a bit rare not easy to get a spare!
All I am looking for is a spare to get me somewhere to a garage. In case something happens. Not looking for dead replacement.
I have amended my original post. I have a LPG tank in my spare wheel carrier.
Any spare will be going in the back secured by belts!
I got Mille Miglias on my van and they are a bit rare not easy to get a spare!
All I am looking for is a spare to get me somewhere to a garage. In case something happens. Not looking for dead replacement.
Holdsworth Villa2 1983 1.9 DG, 4 Speed, LPG & Petrol+underslung leisure tank
Re: Spare Wheel
A standard T25 spare would be 8.4% different to the tyres you have on
-
- Registered user
- Posts: 739
- Joined: 18 Aug 2007, 13:19
- 80-90 Mem No: 4023
- Location: Bushey, Hertfordshire
Re: Spare Wheel
Though if I jig around with the spare tyre profile should be able to match the rolling raduis to within few mm couldn't I?
Holdsworth Villa2 1983 1.9 DG, 4 Speed, LPG & Petrol+underslung leisure tank
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Spare Wheel
why have you fitted such a skinny low profile tyre Nesty?
A closer tyre would be a 205/60 X 16
A closer tyre would be a 205/60 X 16
AGG 2.0L 8V. (Golf GTi MkIII)
-
- Registered user
- Posts: 739
- Joined: 18 Aug 2007, 13:19
- 80-90 Mem No: 4023
- Location: Bushey, Hertfordshire
Re: Spare Wheel
They came with the wheels and the tyres were new so just kept with them.
Holdsworth Villa2 1983 1.9 DG, 4 Speed, LPG & Petrol+underslung leisure tank
Re: Spare Wheel
nesty wrote:They came with the wheels and the tyres were new so just kept with them.
nesty wrote: All I am looking for is a spare to get me somewhere to a garage. In case something happens. Not looking for dead replacement.
it's not only the rolling radius that's important. What's the load rating of the tyres?
The load rating in that size I found with a very quick search was 80
You do know that 95 is probably as low as you should go and ideally you want 97 and above.
Commercial tyres on the standard steels are about 102 load rated and on the standard alloys I think it was 97.
Use the tyre calculator at http://www.brick-yard.co.uk/VehicleSpec ... ltwhls.htm" onclick="window.open(this.href);return false; to see what tyre ratio is the nearest to the tyres on our alloys (175/70/14C) but if the load rating of the tyres on your alloys is only 80 then the spare is the last thing you need to sort.
Are your alloys strong enough to use on a T25? I may be rambling like a moaning git but it's better to be safe
Last edited by Cruz on 04 Apr 2011, 10:50, edited 1 time in total.