Hello all,
I have had a good read through as much of the alt tyres and wheels posts as my tiny mind can handle and I still cant grasp it properly.
I am planning on running the normal 14" VW wheels and tyres up front and a pair of Merc steels at the back. I have got hold of a pair of 16x7.5 steel wheels of an old AMG merc and want to fit them. I have test fit the rims (without tyres) and there seem to be no fouling but could do with some final clarification before I spend some money on new rubber
The wheels are as follows
16"
7.5J wide
et 41
I have test fit with a 10mm spacer to make et31 i presume and they do look better as they are further from the trailing arm etc but with the downside of them being closer to the outside of the van
I am also looking to lower the van (crewcab) by 50mm as it carries nothing and looks like its on stilts at the moment just in case this makes any difference to the answers i hopefully get
Right thats all the information
now the questions are
Should I use a spacer? if so what size?
What width tyres should I use 205 225?
has anybody any preference to makes of tyre?
As always thanks in advance for all your time and I look forward to someone making sense of this!!
Merc Steels and offset width and everything else
Moderators: User administrators, Moderators
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Merc Steels and offset width and everything else
I don't understand why you want to fit odd rims...
all 16" or all 14"
why the difference?
I don't know but that might cause a problem with insurance or MOT
all 16" or all 14"
why the difference?
I don't know but that might cause a problem with insurance or MOT
AGG 2.0L 8V. (Golf GTi MkIII)
-
- Registered user
- Posts: 73
- Joined: 24 Sep 2008, 21:24
- 80-90 Mem No: 6288
- Location: Chorley, Lancs
Re: Merc Steels and offset width and everything else
does anyone know if this is the case am I not able to use different sized RIM not final wheel size but RIM??
Cheers
James
Cheers
James
- Hacksawbob
- Registered user
- Posts: 4443
- Joined: 11 Oct 2005, 07:11
- 80-90 Mem No: 1168
- Location: Lancs UK member 1168
Re: Merc Steels and offset width and everything else
to raise the gearing? and to look like an entry in wacky racers!why the difference?
member 1168
-
- Registered user
- Posts: 73
- Joined: 24 Sep 2008, 21:24
- 80-90 Mem No: 6288
- Location: Chorley, Lancs
Re: Merc Steels and offset width and everything else
see hacksawbob understands me, i always considered myself to be a bit of a muttley
i've been searching the internet for any info regarding different sized rims and cant seem to find any so far, anybody know any real details?
Cheers
James
i've been searching the internet for any info regarding different sized rims and cant seem to find any so far, anybody know any real details?
Cheers
James
- AdrianC
- Registered user
- Posts: 2975
- Joined: 29 Dec 2010, 21:57
- 80-90 Mem No: 9144
- Location: Living in Hay whilst the Sun pours down.
- Contact:
Re: Merc Steels and offset width and everything else
JamesT25 wrote:i've been searching the internet for any info regarding different sized rims and cant seem to find any so far, anybody know any real details?
There's nothing to stop you - just so long as each end matches side-to-side.
Whether it's a good move - either technically or cosmetically - well, that's another issue... <grin>
A year and a half living in a Westy hightop... http://www.WhereverTheRoadGoes.com" onclick="window.open(this.href);return false;