will mercedes ml 4x4 alloys fit?
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 68
- Joined: 05 Feb 2010, 18:45
- 80-90 Mem No: 8217
- Location: Watchet, in sunny Somerset!
will mercedes ml 4x4 alloys fit?
hey, wil the merc ml allos fit my t25, will the 225/75/16 tyres fit/look stupid, im just about to finish a petrol-1y conversion if thats relevant with gearing etc, thanks
-
- Registered user
- Posts: 314
- Joined: 21 Jan 2010, 19:40
- 80-90 Mem No: 8714
- Location: Bradford On Avon
- Contact:
Re: will mercedes ml 4x4 alloys fit?
Check the BCD, to fit your bus it needs to be 5 x 112mm, I'm pretty sure most mercs run this size, I'm running CLK wheels on mine
I'm not very good with the offset thing though - which I'm told is pretty vital
I'm not very good with the offset thing though - which I'm told is pretty vital
Single cab pickup, running 1996 Subaru WRX STI engine, Aiden talbot gearbox.
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: will mercedes ml 4x4 alloys fit?
Yes they do..
I fitted 1999 ML's to my van, center bore is good and all you'll need are 10mm spacers with longer studs.
boot them with 215/60 X 16. 99. reinforced tyres (Vanco or pirelli as a suggestion)
the center caps are made from golf Mk1 centers and benz caps (all in the wiki)
I fitted 1999 ML's to my van, center bore is good and all you'll need are 10mm spacers with longer studs.
boot them with 215/60 X 16. 99. reinforced tyres (Vanco or pirelli as a suggestion)
the center caps are made from golf Mk1 centers and benz caps (all in the wiki)
AGG 2.0L 8V. (Golf GTi MkIII)
-
- Registered user
- Posts: 68
- Joined: 05 Feb 2010, 18:45
- 80-90 Mem No: 8217
- Location: Watchet, in sunny Somerset!
Re: will mercedes ml 4x4 alloys fit?
cheers these look smart
- pionte
- Registered user
- Posts: 549
- Joined: 17 Oct 2009, 10:35
- 80-90 Mem No: 8209
- Location: Tonbridge Kent
Re: will mercedes ml 4x4 alloys fit?
kevtherev wrote:Yes they do..
I fitted 1999 ML's to my van, center bore is good and all you'll need are 10mm spacers with longer studs.
boot them with 215/60 X 16. 99. reinforced tyres (Vanco or pirelli as a suggestion)
the center caps are made from golf Mk1 centers and benz caps (all in the wiki)
Kev what wheel nuts/bolts did you use?
I have done some research but am still a little unsure, am I correct in thinking that I will need longer rear studs pressed into the hubs? If so what length did you use and what nuts? I have read something about the nuts / bolts needing to be a certain shape, ie triangle taper rathervthan round taper? is this the same on the front bolts?? any help/advise very welcome.What suspension are you using? how low? basically I just want to copy your set up lol.
Also where did you get yours powder coated? How much was it? I have just been quoted £480 for the four
Martin.
2.5 Quad Cam Scooby engine . Westfalia California 1989
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: will mercedes ml 4x4 alloys fit?
Hi Martinpionte wrote:kevtherev wrote:Yes they do..
I fitted 1999 ML's to my van, center bore is good and all you'll need are 10mm spacers with longer studs.
boot them with 215/60 X 16. 99. reinforced tyres (Vanco or pirelli as a suggestion)
the center caps are made from golf Mk1 centers and benz caps (all in the wiki)
Kev what wheel nuts/bolts did you use?
I have done some research but am still a little unsure, am I correct in thinking that I will need longer rear studs pressed into the hubs? If so what length did you use and what nuts? I have read something about the nuts / bolts needing to be a certain shape, ie triangle taper rathervthan round taper? is this the same on the front bolts?? any help/advise very welcome.What suspension are you using? how low? basically I just want to copy your set up lol.
Also where did you get yours powder coated? How much was it? I have just been quoted £480 for the four
Martin.
you will indeed need longer rear and front studs replacing the bolt types. (cut to legnth yourself)
The nuts will need to be radiused for the Merc rims.
(All available from Brickwerks)
I have standard suspension with twenty four year old shocks.
This may suprise you but the wheels are painted.
Most sand blasters will charge a tenner a wheel for the removal of the old coating.
A local sprayers will put a good coat of hard two pack paint on for a tenner a wheel too...
which is what I did.
Added bonus is scratches and marks T cut out.
PS My local coater would coat the wheels for £25 when the colour came up in the booth, but I couldn't wait.
AGG 2.0L 8V. (Golf GTi MkIII)
- pionte
- Registered user
- Posts: 549
- Joined: 17 Oct 2009, 10:35
- 80-90 Mem No: 8209
- Location: Tonbridge Kent
Re: will mercedes ml 4x4 alloys fit?
Thanks for the info Kev,
I bought some ML 16x 6.5j the other night as I think that they look really good on yours, and more importantly are designed to take the weight.
The tyre choice I still havnt decided on.... The 215 16 60 99 that you have should be fine with a load rating of 775kg per corner, but am still thinking maybe getting commercial rated tyres, these are good value http://www.camskill.co.uk/products.php? ... 3193p21524" onclick="window.open(this.href);return false;
These are good upto 875 kg per corner.
Am I getting too paranoid about the weight ??
The other thing I am unsure of is how low I can drop without any rubbing, I may try 20 mm rear spacers to give the van a better looking stance, but untill I have the tyres on the rims and offered up I am unsure what clearance I will have, and then I will decide either to drop 30mm or 50mm.
i have found a local place that will sand blast and wet paint for me, just waiting for the guy to get back to me with the price, Thanks for the tip I am going to go shiny black I think.
Thanks again for your help, always appreciated .
Martin.
I bought some ML 16x 6.5j the other night as I think that they look really good on yours, and more importantly are designed to take the weight.
The tyre choice I still havnt decided on.... The 215 16 60 99 that you have should be fine with a load rating of 775kg per corner, but am still thinking maybe getting commercial rated tyres, these are good value http://www.camskill.co.uk/products.php? ... 3193p21524" onclick="window.open(this.href);return false;
These are good upto 875 kg per corner.
Am I getting too paranoid about the weight ??
The other thing I am unsure of is how low I can drop without any rubbing, I may try 20 mm rear spacers to give the van a better looking stance, but untill I have the tyres on the rims and offered up I am unsure what clearance I will have, and then I will decide either to drop 30mm or 50mm.
i have found a local place that will sand blast and wet paint for me, just waiting for the guy to get back to me with the price, Thanks for the tip I am going to go shiny black I think.
Thanks again for your help, always appreciated .
Martin.
2.5 Quad Cam Scooby engine . Westfalia California 1989
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: will mercedes ml 4x4 alloys fit?
pionte wrote:Thanks for the info Kev,
I bought some ML 16x 6.5j the other night as I think that they look really good on yours, and more importantly are designed to take the weight.
The tyre choice I still havnt decided on.... The 215 16 60 99 that you have should be fine with a load rating of 775kg per corner, but am still thinking maybe getting commercial rated tyres, these are good value http://www.camskill.co.uk/products.php? ... 3193p21524" onclick="window.open(this.href);return false;
These are good upto 875 kg per corner.
Am I getting too paranoid about the weight ??
The other thing I am unsure of is how low I can drop without any rubbing, I may try 20 mm rear spacers to give the van a better looking stance, but until I have the tyres on the rims and offered up I am unsure what clearance I will have, and then I will decide either to drop 30mm or 50mm.
i have found a local place that will sand blast and wet paint for me, just waiting for the guy to get back to me with the price, Thanks for the tip I am going to go shiny black I think.
Thanks again for your help, always appreciated .
Martin.
If the tyres are rated over 95 then that is adequate for the van weight
I would suggest no lower than 50mm it looks good and would not over strain the suspension, plus the ride would not be too badly compromised
20mm spacers would put the rims out side the accepted ET for the suspension
AGG 2.0L 8V. (Golf GTi MkIII)
Re: will mercedes ml 4x4 alloys fit?
whats the accepted ET?
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: will mercedes ml 4x4 alloys fit?
Good question...
T25's that came from the factory with steel wheels have a ET of 39 while T25's that left the factory with alloy wheels came with a ET of 30.
So if that's good enough for VW it's OK with me
anywhere between the two gives a good chance of hitting it right with stock spacers
T25's that came from the factory with steel wheels have a ET of 39 while T25's that left the factory with alloy wheels came with a ET of 30.
So if that's good enough for VW it's OK with me
anywhere between the two gives a good chance of hitting it right with stock spacers
AGG 2.0L 8V. (Golf GTi MkIII)
- pionte
- Registered user
- Posts: 549
- Joined: 17 Oct 2009, 10:35
- 80-90 Mem No: 8209
- Location: Tonbridge Kent
Re: will mercedes ml 4x4 alloys fit?
Kev just another couple of questions !
I am just about to order some spacers and longer wheel studs from Dr Baxter's emporium of fine Vedubauu spares but I am still a little unsure, are you saying that you changed your front bolts to studs and nuts? And the link on Wiki to make the vw centre caps appears to be broken http://wiki.club8090.co.uk/index.php/Wh ... erc_alloys" onclick="window.open(this.href);return false;
Am I looking in the right place.
Cheers Martin.
I am just about to order some spacers and longer wheel studs from Dr Baxter's emporium of fine Vedubauu spares but I am still a little unsure, are you saying that you changed your front bolts to studs and nuts? And the link on Wiki to make the vw centre caps appears to be broken http://wiki.club8090.co.uk/index.php/Wh ... erc_alloys" onclick="window.open(this.href);return false;
Am I looking in the right place.
Cheers Martin.
2.5 Quad Cam Scooby engine . Westfalia California 1989
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: will mercedes ml 4x4 alloys fit?
yes all the studs have to be longer and the bolts replaced with long studs and they are the tapered.
All the studs have to be cut to size once the nuts are fitted. The fronts just screw in, use a lock nut to fix em tight.
I used nice chrome nuts which have a known depth so it was a simple math exercise to cut the right length.
yeah that link... looks like it was moved here...
http://wiki.club8090.co.uk/index.php/Bo ... entre_caps" onclick="window.open(this.href);return false;
All the studs have to be cut to size once the nuts are fitted. The fronts just screw in, use a lock nut to fix em tight.
I used nice chrome nuts which have a known depth so it was a simple math exercise to cut the right length.
yeah that link... looks like it was moved here...
http://wiki.club8090.co.uk/index.php/Bo ... entre_caps" onclick="window.open(this.href);return false;
AGG 2.0L 8V. (Golf GTi MkIII)
- pionte
- Registered user
- Posts: 549
- Joined: 17 Oct 2009, 10:35
- 80-90 Mem No: 8209
- Location: Tonbridge Kent
Re: will mercedes ml 4x4 alloys fit?
Thanks again Kev... will these do the job?
http://cgi.ebay.co.uk/GOLF-MK1-GTI-CABR ... 1425wt_911" onclick="window.open(this.href);return false;
http://cgi.ebay.co.uk/GOLF-MK1-GTI-CABR ... 1425wt_911" onclick="window.open(this.href);return false;
2.5 Quad Cam Scooby engine . Westfalia California 1989
Re: will mercedes ml 4x4 alloys fit?
How come everything on ebay is rare?
- kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: will mercedes ml 4x4 alloys fit?
pionte wrote:Thanks again Kev... will these do the job?
http://cgi.ebay.co.uk/GOLF-MK1-GTI-CABR ... 1425wt_911" onclick="window.open(this.href);return false;
great find... you'll need these aswell to fit in the ML alloy.. 4 X MERCEDES BENZ WHEEL CENTRES/CAPS 75mm, usualy chime in at £8 a set
AGG 2.0L 8V. (Golf GTi MkIII)