Froli bed system

The Tardis factor (interiors, awnings, roofs etc)

Moderators: User administrators, Moderators

Post Reply
User avatar
zoona
Registered user
Posts: 155
Joined: 19 Feb 2020, 10:47
80-90 Mem No: 17130
Location: Zug, Switzerland

Froli bed system

Post by zoona »

Has anybody retrofitting this to their camper?

https://www.froli.com/shop/schlafen-unt ... oli-travel

Beds are getting uncomfortable, and we have tried this in a new camper and seems to be very good

I have ordered one set to go in the high roof for my daughter as the mattress up there is pathetic.

I then got thinking about fitting to the lower bed as well.

I think I could take out the bottom 3 or 4 cm of foam from the bottom of the cushions and put the into the seat/seat back (then do something similar with the engine cover mattress).

The alternative is obviously new foam - I got as far as drawing up exactly the right shape foam to order them and then the supplier went quiet. Delivery of foam to me is a bit of a pain and I can't find a supplier out here, so if I can get the froli thing to work out would be a lot easier.

Anybody used them in an old camper?
Last edited by zoona on 24 Feb 2021, 08:23, edited 1 time in total.
1987 Westfalia High Top Joker. DG SP
1993 MX5 turbo track car

User avatar
zoona
Registered user
Posts: 155
Joined: 19 Feb 2020, 10:47
80-90 Mem No: 17130
Location: Zug, Switzerland

Re: Froli bed system

Post by zoona »

Aha. Found somebody who had done the same ..

https://vwbusforum.ch/t/erfahrungen-fro ... stem/36976
1987 Westfalia High Top Joker. DG SP
1993 MX5 turbo track car

User avatar
zoona
Registered user
Posts: 155
Joined: 19 Feb 2020, 10:47
80-90 Mem No: 17130
Location: Zug, Switzerland

Re: Froli bed system

Post by zoona »

I seem to be chatting to myself, but just in case anybody is listening... I fitted this to the top bed, and my daughter reports that it is much more comfortable.

One standard pack was enough to cover most of the top bed - easily enough for one person.
1987 Westfalia High Top Joker. DG SP
1993 MX5 turbo track car

Stesaw
Registered user
Posts: 1892
Joined: 10 Aug 2019, 23:30
80-90 Mem No: 17004
Location: Coventry

Re: Froli bed system

Post by Stesaw »

First I've heard of such a thing. I just double up on quilts to sleep on if I get uncomfortable.. at least at the moment anyway!
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project

User avatar
zoona
Registered user
Posts: 155
Joined: 19 Feb 2020, 10:47
80-90 Mem No: 17130
Location: Zug, Switzerland

Re: Froli bed system

Post by zoona »

Westfalia are using it in their new builds:

https://www.westfalia-mobil.com/modelle ... -joker.php

I will be experimenting with the lower bed today. The 30 odd year old foam is getting a little tired in ours...
1987 Westfalia High Top Joker. DG SP
1993 MX5 turbo track car

User avatar
clift_d
Registered user
Posts: 3290
Joined: 04 Oct 2012, 23:51
80-90 Mem No: 11695
Location: Hackney innit

Re: Froli bed system

Post by clift_d »

It looks like they've increased the height of the 'ramp up' bit of the running track to allow extra clearance for the sliding bed part, so I'd be interested to see how this fits on an existing Westy, as the upper mattress is already pretty thin and that Froli system adds nearly 4cm in height.

Image
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro

User avatar
zoona
Registered user
Posts: 155
Joined: 19 Feb 2020, 10:47
80-90 Mem No: 17130
Location: Zug, Switzerland

Re: Froli bed system

Post by zoona »

The froli bit fits under the sliding section, but you have to take the 'mattress' (and I use that term completely incorrectly for the very thin but if foam!) bit off.
It definitely makes it more fiddly, but it's not the end of the world.
1987 Westfalia High Top Joker. DG SP
1993 MX5 turbo track car

User avatar
clift_d
Registered user
Posts: 3290
Joined: 04 Oct 2012, 23:51
80-90 Mem No: 11695
Location: Hackney innit

Re: Froli bed system

Post by clift_d »

How do the supports stand up to being loaded for long periods? We use our upper bunk area a bit like an inside roof rack and so there's almost always a whole bunch of stuff sat up there - do they gradually lose some of their spring? Also do you find the ones at front edge get damaged where you climb up onto them?
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro

User avatar
zoona
Registered user
Posts: 155
Joined: 19 Feb 2020, 10:47
80-90 Mem No: 17130
Location: Zug, Switzerland

Re: Froli bed system

Post by zoona »

We only put a thin topper from the bottom bed and the reflective screen covers up there.
They are quite soft, but I think it would take quite a lot of weight to bugger them up...

Ultimate goal is to try to put them into the seats under the foam, which means that my 10 year old would be sitting on them when we are on the move.
I have seen official advice against this, but it's not like we ever go anywhere for more than a few hours drive anyway. Unless we break down of course...

Will get some pictures tomorrow.
1987 Westfalia High Top Joker. DG SP
1993 MX5 turbo track car

Post Reply