Page 1 of 1

Washing westfalia pop top tent.

Posted: 26 Sep 2020, 15:31
by Rascal
Has anyone removed a westfalia pop top tent. Bunged it in the washing machine with nikwax tech was to re waterproof ( I'm aware spray versions are available)
But the one I just acquired is in need of a good clean aswell
It would allow me to service the roof etc while I'm at it.?

Re: Washing westfalia pop top tent.

Posted: 26 Sep 2020, 16:52
by davidoft1
Yes and it was perfectly fine :)

Re: Washing westfalia pop top tent.

Posted: 26 Sep 2020, 17:41
by sarran1955
Hello,

I have done this with my pop top, but sprayed on the wax after.

I scrubbed the oily marks where the spring had touched and then straight in the wash.

I have fitted Velcro to mine, so it can come off in no time.

Cordialement,

:ok

Re: Washing westfalia pop top tent.

Posted: 27 Sep 2020, 18:43
by TONYT25T25
I was going to add something like and waterproofs your skivvies during the next wash, but did not think it was a suitable thing to say. :idea: :lol:

Re: Washing westfalia pop top tent.

Posted: 27 Sep 2020, 19:26
by ZsZ
You will need a really big washing machine.
Our 6kg frontloader was struggling with the thick tent material.

Re: Washing westfalia pop top tent.

Posted: 30 Sep 2020, 20:26
by Rascal
My machine does 7kg.. Just need to commit and undow a lot off screws and remove the tent now. Been chucking it down today. So as soon as I get a dry day in the machine it goes.. I'll do my best to show a before and after. As it really needs a wash. Then I'll have to wash again with the reprofer..

Re: Washing westfalia pop top tent.

Posted: 01 Oct 2020, 18:56
by Rascal
Tent came off nice and easy... The upper edge has no bead and appears to have been crudely trimmed along the sides. Going to soak the tent overnight to get rid off the stubborn stains.. And while I wait for the new stainless steel screws from brikwerks any recommendations for which westfalia seal to buy.. I understand there are several option. For the pop top.. Single piece or two piece withthe seal. Around the edge having an extra"bulb" as opposed to just edging strip

Thanks
Russ