Varnish/stain birch ply

The Tardis factor (interiors, awnings, roofs etc)

Moderators: Moderators, User administrators

Post Reply
100leelee
Posts: 457
Joined: 31 Dec 2016, 18:28
80-90 Mem No: 15962
Location: Dinnington, South Yorkshire

Varnish/stain birch ply

Post by 100leelee »

Hi
The time has come to protect the newly fitted 15mm birch ply units/worktop.
Seems a shame to paint it, would rather stain and varnish etc
Has anyone done this?
Thinking decent varnish, satin or Matt finish??

Cheers

User avatar
AngeloEvs
Posts: 1032
Joined: 22 Nov 2007, 19:22
80-90 Mem No: 4709
Location: Upwell, Norfolk

Re: Varnish/stain birch ply

Post by AngeloEvs »

I prefer matt or satin. Clear water based varnish such as Ronseal Diamond will not colour the natural colour of the wood, dries within 20 - 30 minutes and you only need soap/water to clean brushes. If you want to stain then you can use virtually any stain varnish but drying time and cleaning will vary depending on the type of varnish.
1987 DG Karisma LPG with remodelled interior

Fugeh
Posts: 162
Joined: 27 Jun 2019, 12:37
80-90 Mem No: 0

Re: Varnish/stain birch ply

Post by Fugeh »

Varnish can yellow up the ply - I'd go for a water based polyurethane personally.
88 Autosleeper Trident 1.9
Hythe, Kent.

User avatar
Ant-t
Posts: 1893
Joined: 05 Jan 2015, 14:17
80-90 Mem No: 14390
Location: West Sussex

Re: Varnish/stain birch ply

Post by Ant-t »

I stained mine with a water based stain, I learnt to let them completely dry out before varnishing. I've also gone for a satin finish but have used gloss on the inner kitchen surfaces as its hard wearing and waterproof.
1983 Dg Kamper 2

Ads1987
Posts: 182
Joined: 06 Nov 2012, 22:11
80-90 Mem No: 13081
Location: Golden Green, Kent

Re: Varnish/stain birch ply

Post by Ads1987 »

Danish oil works well and brings out the grain, then you can periodically polish it up with a good quality beeswax, I made my previous interior out of plywood and used this and was happy with the results.
1982 T25 1.9 DG model with 4 speed box

phinw
Posts: 84
Joined: 19 Jun 2017, 08:32
80-90 Mem No: 16041
Location: Colchester | Essex

Re: Varnish/stain birch ply

Post by phinw »

I'd agree with a water based PU varnish is the most fuss free, ideally 3 coats, de-nibbed between each with fine wire wool or 600 grit paper. The Ronseal Diamond mentioned is a good one.

Osmo hard wax oil is also a good option but it will yellow more over time in a sunny van.

There is some pics of my 15mm birch ply interior on this thread: https://forum.club8090.co.uk/viewtopic. ... 0&t=165782 done with PU varnish. If you have exposed cut edges like mine make sure you polish them up to a fine grit otherwise they will drink varnish!
1988 1.9 DG

User avatar
clift_d
Posts: 2629
Joined: 04 Oct 2012, 23:51
80-90 Mem No: 11695
Location: Hackney innit

Re: Varnish/stain birch ply

Post by clift_d »

Danish oil is a nice finish for interior joinery, but I'm not sure that I'd class it as being ideal for use in a campervan.

I'd suggest you use something more hard wearing like a decent water based floor lacquer instead - something like Bona Mega which won't noticeably colour the plywood.
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro

mckenzie798
Posts: 6
Joined: 03 Jul 2020, 08:00
80-90 Mem No: 0

Re: Varnish/stain birch ply

Post by mckenzie798 »

     sorry for the late reply, I work with ply alot and have done many "finished" projects recently including the bed and storage unit for a T25 in ply.
     I would recommend a starting coat of 1:1:1 of polyurethane varnish, clear wood oil (linseed,ikeas own) and thinners. This mix gives a nice hue with minimal darkening that soaks in well and gives water resistance. The finish is fairly matt and smooth.
     If you want a harder, glossier wear resistant finish. It can be finished with a few thin coats of varnish to achieve this.
before and after photos (the wood is still drying, i didn't get a dry shot of just the oil varnish mix dry, the last one is after a few coats of varnish)
ImageImageImage

100leelee
Posts: 457
Joined: 31 Dec 2016, 18:28
80-90 Mem No: 15962
Location: Dinnington, South Yorkshire

Re: Varnish/stain birch ply

Post by 100leelee »

Looks great!!

Will give it a go...

Post Reply