Hi
So next up is insulating/ lining the hi top.
How have others done this or how should it be done?
It was just carpeted when I bought the van.
Will def put some insulation roll up there. Main question is the carpet lining.. will this be OK glued to the foil insulation or should the roof be lined with ply?
Would also like lights up there, so am talking myself into battens/ ply lining..!
Thanks
Leisuredrive hi top relining
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 10
- Joined: 26 Aug 2018, 16:40
- 80-90 Mem No: 17319
- Location: Leicestershire
Re: Leisuredrive hi top relining
Did mine last winter with ply, covered with the perforated fabric used in the cab. Lightened it up really well and made it feel a lot more spacious.
-
- Registered user
- Posts: 519
- Joined: 31 Dec 2016, 18:28
- 80-90 Mem No: 15962
- Location: Dinnington, South Yorkshire
Re: Leisuredrive hi top relining
andrew882 wrote:Did mine last winter with ply, covered with the perforated fabric used in the cab. Lightened it up really well and made it feel a lot more spacious.
Hi
Did you glue battens to the fibreglass shell, then screw the ply to those?
What thickness ply did you use?
Thanks!!
Lee
-
- Registered user
- Posts: 85
- Joined: 19 Jun 2017, 08:32
- 80-90 Mem No: 16041
- Location: Colchester | Essex
Re: Leisuredrive hi top relining
Mine was just done with 10mm foil back self adhesive foam insulation stuck into the high top and then the carpet spray glued over the top to the foil side. The carpet sticks to the foil absolutely fine (the spray glue is mega sticky). The only problem I had is that the self adhesive insulation needed some extra help (with more spray glue) in some places. It likes a really clean surface (i.e painted metal) and in some spots where the old carpet was removed from the fibreglass it was less than optimal.
1988 1.9 DG
-
- Registered user
- Posts: 85
- Joined: 19 Jun 2017, 08:32
- 80-90 Mem No: 16041
- Location: Colchester | Essex
Re: Leisuredrive hi top relining
Re: the lights I just bonded ply strips or rings to the places where I wanted to screw them with PU adhesive (sikaflex) and taped the cables in place before I glued the carpet up.
1988 1.9 DG
-
- Registered user
- Posts: 10
- Joined: 26 Aug 2018, 16:40
- 80-90 Mem No: 17319
- Location: Leicestershire
Re: Leisuredrive hi top relining
Hey Lee,
I screwed the ply lining to pads that were already fitted, although some were the worse for wear due to a leak around the skylight that the previous owner had told me about. I replaced them, fixing them with Sikaflex to the fibreglass. I did consider fixing the new roof panels with Sikaflex too, in order to get a cleaner look, but in the end went for screws and covered the heads with plastic caps. This means that if I ever need to get access to deal with any issues I don't have to scrap the panels.
The ply I used was 2mm (I think), but the thinner the better, as you need a bit of flexibility to 'urtcher' it into place!
I'm pretty happy with the result
I screwed the ply lining to pads that were already fitted, although some were the worse for wear due to a leak around the skylight that the previous owner had told me about. I replaced them, fixing them with Sikaflex to the fibreglass. I did consider fixing the new roof panels with Sikaflex too, in order to get a cleaner look, but in the end went for screws and covered the heads with plastic caps. This means that if I ever need to get access to deal with any issues I don't have to scrap the panels.
The ply I used was 2mm (I think), but the thinner the better, as you need a bit of flexibility to 'urtcher' it into place!
I'm pretty happy with the result
-
- Registered user
- Posts: 519
- Joined: 31 Dec 2016, 18:28
- 80-90 Mem No: 15962
- Location: Dinnington, South Yorkshire
Re: Leisuredrive hi top relining
andrew882 wrote:Hey Lee,
I screwed the ply lining to pads that were already fitted, although some were the worse for wear due to a leak around the skylight that the previous owner had told me about. I replaced them, fixing them with Sikaflex to the fibreglass. I did consider fixing the new roof panels with Sikaflex too, in order to get a cleaner look, but in the end went for screws and covered the heads with plastic caps. This means that if I ever need to get access to deal with any issues I don't have to scrap the panels.
The ply I used was 2mm (I think), but the thinner the better, as you need a bit of flexibility to 'urtcher' it into place!
I'm pretty happy with the result
That’s what I’ve done, half way through, will post some pics later.. thanks for the advice
-
- Registered user
- Posts: 10
- Joined: 26 Aug 2018, 16:40
- 80-90 Mem No: 17319
- Location: Leicestershire
Re: Leisuredrive hi top relining
No worries, glad it's going well.
-
- Registered user
- Posts: 519
- Joined: 31 Dec 2016, 18:28
- 80-90 Mem No: 15962
- Location: Dinnington, South Yorkshire
Re: Leisuredrive hi top relining
It taken far longer than I expected.. insulating, new ply, etcandrew882 wrote:No worries, glad it's going well.
Got the new units to go in, gotta finish the roof and carpet first..