Page 1 of 1
Retro fitting a Westy interior
Posted: 03 Apr 2019, 20:11
by bmouthrob
I have gotten my grubby mitts on a Westfalia interior. I'm in the process if re upholstering the rear bench as it was in a bit of a sorry state, however in parallel I am looking at fitting the structure of the rear bench. There are various mount points, both on the floor and also the rear in front of the engine access. I have checked and unfortunately none of those mount points exist so my question is what is the best way to create mount points in the various places?
Thanks in advance!
Re: Retro fitting a Westy interior
Posted: 12 Apr 2019, 11:12
by Oilline
Im wanting the same information
Re: Retro fitting a Westy interior
Posted: 12 Apr 2019, 11:37
by davidoft1
They are additional mounting points westfalia, specific, assume is LHD ? I’m breaking a Westy so could cut the mountings out and measure their locations
Re: Retro fitting a Westy interior
Posted: 13 Apr 2019, 06:48
by Oilline
Measurements and pictures of where the mounts are would be good
Re: Retro fitting a Westy interior
Posted: 15 Apr 2019, 20:42
by bmouthrob
That would be great. Its a rhd but a twin slider.
Re: Retro fitting a Westy interior
Posted: 28 Apr 2019, 16:45
by irishkeet
bmouthrob wrote:I have gotten my grubby mitts on a Westfalia interior. I'm in the process if re upholstering the rear bench as it was in a bit of a sorry state, however in parallel I am looking at fitting the structure of the rear bench. There are various mount points, both on the floor and also the rear in front of the engine access. I have checked and unfortunately none of those mount points exist so my question is what is the best way to create mount points in the various places?
Thanks in advance!
Hi bmouthrob
Where are you based? Im sure I have 1 mount left from when I fitted the westy interior in my syncro, I have no measurements but there is a lot of pics on my thread that may help you....
http://forum.club8090.co.uk/viewtopic.php?f=4&t=141925
With the mount you can easily make up some others, drop me a PM
cheers
irishkeet
Re: Retro fitting a Westy interior
Posted: 18 Nov 2020, 08:52
by Frode
Hello i also need all this weld on captive nuts brackets. Any for sale. Frode
Re: Retro fitting a Westy interior
Posted: 18 Nov 2020, 10:48
by irishkeet
Drop me a PM mate