Someone has had a go at a VC...

For 4x4 owners, you must register to post but anyone can read.

Moderators: Moderators, User administrators

Forum rules
You can find further syncro specific information on the Syncronauts website.
Post Reply
User avatar
silverbullet
Trader
Posts: 12983
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Someone has had a go at a VC...

Post by silverbullet »

...but no cigar. Appears to be a commercial job with a scratched-on number?
I think it's overfilled, seals are intact but the weep holes are still crammed with rubber "worms" from the previous seal failure, so its not a quality job.
I weighed it before opening, we'll see what that reveals at the end...Image

Sent from my S60 using Tapatalk
85 syncro Caravelle twin slider Oettinger T3200E-6
90 SA Microbus supercharged wbx/UN1 project

http://www.025motorsport.com

User avatar
silverbullet
Trader
Posts: 12983
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: Someone has had a go at a VC...

Post by silverbullet »

PS the eagle-eyed amongst you will see the damage to the end plate at 3 and 9 o'clock, where someone has used a pair of screws to jack the end cover off...

Sent from my S60 using Tapatalk
85 syncro Caravelle twin slider Oettinger T3200E-6
90 SA Microbus supercharged wbx/UN1 project

http://www.025motorsport.com

Post Reply