My Unusual ribbon cable...

An alchemy of sparks, copper wire and earth

Moderators: Moderators, User administrators

Post Reply
Posts: 11
Joined: 21 Sep 2019, 22:12
80-90 Mem No: 0
Location: Gloucestershire

My Unusual ribbon cable...

Post by h00per »

Recently I tried to work out why my temp gauge didn't flash on start-up. I pulled the dash and found the middle contact was not attached. This is why...


Top is a spare part and dated on the PCB 1982.
Bottom is the part pulled from my bus no date.

Every photo I can find shows the temp gauge connects with the centre higher. Why are mine in a line?
1983 1.9 DG Manual

Post Reply