Hello chaps.
how can I check to see if the cooling fan works without running the engine?
Cooling fan
Moderators: User administrators, Moderators
Cooling fan
1990 1.6 Diesel non turbo
-
- Registered user
- Posts: 128
- Joined: 01 May 2011, 22:33
- 80-90 Mem No: 9604
- Location: Dunoon, Scotland
Re: Cooling fan
Ignition switch in the run position, remove the wiring plug from the temp switch on the radiator, bridge the terminals in the plug.
There's a thread on here somewhere that gives you the colours of the terminal to bridge, there's a common live, then a contact each for the low & high speed circuits (assuming it's the same as a petrol).
Rob
There's a thread on here somewhere that gives you the colours of the terminal to bridge, there's a common live, then a contact each for the low & high speed circuits (assuming it's the same as a petrol).
Rob
Sandy & Rob live with Vinnie, an '84 1.9 DG Leisuredrive