Hi,
I am replacing the radius rod bushes at the moment and after removing the rods, I have a lot of corrosion where the bushes/rod insert into the front chassis member.
I am confident of repairing the member, but I am unsure of what size hole would have been in the bracket as it is badly corroded and misshapen.
I know the bush sleeve is 24mm OD, but how much clearance around the bush is required?
Any help is much appreciated.
there are a lot of porn sites on the web today, but very few really good ones. we have collected for you good porn sites in one place https://goodpornsites.pro/
radius rod chassis repair
Moderators: User administrators, Moderators
radius rod chassis repair
Last edited by lipuroqi on 08 Dec 2021, 08:02, edited 1 time in total.
- Mocki
- Membership Admin
- Posts: 16981
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: radius rod chassis repair
I take it you have seen these ?
https://www.brickwerks.co.uk/body-panel ... -left.html
there have been several threads on this repair .....
viewtopic.php?f=37&t=170870&hilit=Radius+rod+repair
use the search box and. Enter "radius rod repair "
https://www.brickwerks.co.uk/body-panel ... -left.html
there have been several threads on this repair .....
viewtopic.php?f=37&t=170870&hilit=Radius+rod+repair
use the search box and. Enter "radius rod repair "
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
-
- Registered user
- Posts: 94
- Joined: 15 Aug 2008, 13:40
- 80-90 Mem No: 5801
- Location: Plymouth
Re: radius rod chassis repair
in the process of repairing both chassis mounts-Hole size is 35mm