radius rod chassis repair

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

Post Reply
lipuroqi
Posts: 1
Joined: 03 Feb 2021, 07:36
80-90 Mem No: 0

radius rod chassis repair

Post by lipuroqi »

Hi,

I am replacing the radius rod bushes at the moment and after removing the rods, I have a lot of corrosion where the bushes/rod insert into the front chassis member.
I am confident of repairing the member, but I am unsure of what size hole would have been in the bracket as it is badly corroded and misshapen.
I know the bush sleeve is 24mm OD, but how much clearance around the bush is required?
Any help is much appreciated.

Thank you
Paul

User avatar
Mocki
Membership Admin
Posts: 15801
Joined: 29 Sep 2005, 09:27
80-90 Mem No: 428
Location: Mansfield tel/txt 07947137911
Contact:

Re: radius rod chassis repair

Post by Mocki »

I take it you have seen these ? 
https://www.brickwerks.co.uk/body-panel ... -left.html

there have been several threads on this repair .....

viewtopic.php?f=37&t=170870&hilit=Radius+rod+repair

use the search box and. Enter "radius rod repair "
 
Steve
tel / txt 07947137911
Image
just one shade of very fast grey
________________

1989 2.1LpgWBX HiTop Leisuredrive Camper

randolph57
Posts: 90
Joined: 15 Aug 2008, 13:40
80-90 Mem No: 5801
Location: Plymouth

Re: radius rod chassis repair

Post by randolph57 »

in the process of repairing both chassis mounts-Hole size is 35mm

Post Reply