Evening all. Anyone got any tips for inserting new retaining clips into the 5 square holes in the body work?
These are the little fellas I am referring to:
http://www.brickwerks.co.uk/index.php/u ... l?___SID=U" onclick="window.open(this.href);return false;
Typically, all the rusty broken old ones just popped out! But short of upsetting the neighbours with a tirade of expletives, I gave up this evening!
Front upper grille metal retaining clips
Moderators: User administrators, Moderators
- SamsBus2012
- Registered user
- Posts: 561
- Joined: 15 Aug 2012, 10:24
- 80-90 Mem No: 11455
- Location: Devon
Front upper grille metal retaining clips
Tom (aka Matt)
1986 Hightop with 1.9dg 4spd. The boys call him "Magnus"
1986 Hightop with 1.9dg 4spd. The boys call him "Magnus"
-
- Registered user
- Posts: 139
- Joined: 26 Jul 2012, 19:56
- 80-90 Mem No: 17639
- Location: Bonnybridge
Re: Front upper grille metal retaining clips
I used Halfords u type nuts . I thot it would be easier
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Front upper grille metal retaining clips
i have a pair of pliers with a notch cut in to clear the sticky out bits on the clip, no picky at this hour but they then drop straight in,
mm
mm
- SamsBus2012
- Registered user
- Posts: 561
- Joined: 15 Aug 2012, 10:24
- 80-90 Mem No: 11455
- Location: Devon
Re: Front upper grille metal retaining clips
Really fiddly and tried all sorts. I suppose a pair of old fashioned pincers might do the job too
Tom (aka Matt)
1986 Hightop with 1.9dg 4spd. The boys call him "Magnus"
1986 Hightop with 1.9dg 4spd. The boys call him "Magnus"
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Front upper grille metal retaining clips
dunno, you need to grip fully along top and bottom and the notch allows this,you can try and others may have other methods
mm
mm
- SamsBus2012
- Registered user
- Posts: 561
- Joined: 15 Aug 2012, 10:24
- 80-90 Mem No: 11455
- Location: Devon
Re: Front upper grille metal retaining clips
Pincers didnt work, however, worked out how to get them in..
The top little sticky out clip neads to be put in place behind the panel "bracket" then I found that I could squeeze the bottom clip into place by alternately clamping with some narrow nosed pliers each side of the clip until it popped in - tricky little beggars. To MM, I guess your notched pliers would have the same effect so thanks for the comments as it gave me the idea.
Anyway upshot is, grille all back in with no rattles now, nice and secure.
The top little sticky out clip neads to be put in place behind the panel "bracket" then I found that I could squeeze the bottom clip into place by alternately clamping with some narrow nosed pliers each side of the clip until it popped in - tricky little beggars. To MM, I guess your notched pliers would have the same effect so thanks for the comments as it gave me the idea.
Anyway upshot is, grille all back in with no rattles now, nice and secure.
Tom (aka Matt)
1986 Hightop with 1.9dg 4spd. The boys call him "Magnus"
1986 Hightop with 1.9dg 4spd. The boys call him "Magnus"