Hello. First Post n00b coming at you...
I've bought a 1.9DG auto Reimo hightop...
Trouble is that it has two disco seats in it and there are three of us...
It has a make shift 3/4 rock and roll bed in the back.
Weighing up cheap options as the misses doesn't know yet and I want to present it to her on her birthday in two months..
Passenger Setup
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 1809
- Joined: 10 May 2013, 11:59
- 80-90 Mem No: 13706
- Location: Central Scotland
Re: Passenger Setup
Option one - double passenger seat in the cab. Likely to be 30 plus years old and may look it as they were often fitted to commercial vehicles. Not sure of the spendy involved
Option two - render the rocknroll less makeshift. I mind the test drive in ours when we bought it. Tested the brakes and my wife submarined out from under the lap belt on the rear seat as it unfolded from seat to bed. We have a different rock and roll now (can’t recommend as now this model seems NLA) and three point belts.
Option three - sell it to your better half as a work in progress. Arguably the most honest option I think, given many members collective experience?
Option two - render the rocknroll less makeshift. I mind the test drive in ours when we bought it. Tested the brakes and my wife submarined out from under the lap belt on the rear seat as it unfolded from seat to bed. We have a different rock and roll now (can’t recommend as now this model seems NLA) and three point belts.
Option three - sell it to your better half as a work in progress. Arguably the most honest option I think, given many members collective experience?
Have you ever seen an unhappy fool?
88 Transporter with hitop camper conversion, 1.6td.
88 Transporter with hitop camper conversion, 1.6td.
Re: Passenger Setup
Thanks Roger.
I was looking at the T4 front seat conversion as an option as you suggest, but the threads without pictures were a bit confusing. I e. Does the double T4 seat fit in the T3 base or do you have to swap the base out... Etc.
I was looking at the T4 front seat conversion as an option as you suggest, but the threads without pictures were a bit confusing. I e. Does the double T4 seat fit in the T3 base or do you have to swap the base out... Etc.
- Aidan
- Trader
- Posts: 6556
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Passenger Setup
Be aware of handbrake access
chances are it won't be a straight swap fit, or everyone would be doing it and there would be lots of good photos
and if you do go T4 double seat option and make it work then come back and post up some pics and info for the next person
chances are it won't be a straight swap fit, or everyone would be doing it and there would be lots of good photos
and if you do go T4 double seat option and make it work then come back and post up some pics and info for the next person
Re: Passenger Setup
I have a T25 double front seat I was going to fit but it is a very tricky job as the double seat is only found in a pickup and rests on the bulkhead behind. It just falls flat on its own. Also it only has at best a lap belt on the middle seat. T4 conversion I looked at but the seat is very different so I didn't bother pursuing it. I wanted it for my kids but I have taken so long deciding waht to do they they are both older now and are not bothered!! The pictures below are of a prefessional conversion done by a campany. They had to make a frame and seatbelt mounts. I like it TBH but it is a little beyond my capabilities!!