New Flywheel O ring.. Where sells them?

[VanDave]

Hi all
I'm after an O ring for the flywheel on my 2.1 DJ engine, but cant see them on Brickwerks, JK or VW Heritage, anyone know where I can get one from please?
Also, a couple of the 5 flywheel bolts are a bit rounded/loose in the hex socket so could do with replacing them, again any ideas where to get some?

Cheers.

[maxstu]

This one?

https://www.brickwerks.co.uk/flywheel-o ... etrol.html

This one?

https://www.brickwerks.co.uk/socket-hea ... right.html

[VanDave]

Cheers  

[weimarbus]

Always good practice to replace all of the flywheel bolts as a precaution against failure  also if you have removed the flywheel to replace a leaking crankcase oil seal make sure that the flywheel does not have a grove worn into the contact surface with the oil seal ( see 'Itchfeets' post on fitting a 'Speedi sleeve' to the flywheel spigot) other wise you will end up with the same leak.

[maxstu]

Always good practice to replace all of the flywheel bolts as a precaution against failure

And flexplate?