Club 80-90 Forums

Hi all, the 22mm bolts holding the front brake carrier on are seized solid. Tried penetrating fluid and as long a breaker bar as will fit, to no avail. Any tips for getting these off? TIA

Sent from my Pixel 3a using Tapatalk

Have you got some kind of gas axe that you could use on it?

They are very very tight , more force is needed

I had to take mine off to do other work on the ball joints, they are stiff and took me a while, used releasing fluid and a breaker bar and they eventually came loose, ensure when you refit them that you tighten them up to specifications, thought I had on mine but went for a drive and could feel when breaking that all was not as it should be, tightened them up a bit more and all back to normal.

Thanks all for the advice, got there in the end with a bit of persistence and a lot more penetrating fluid

Sent from my Pixel 3a using Tapatalk