Hi all, I've tried asking on Facebook in a couple of places, and looked through the forum here, but I still don't have a definite answer.
When changing the clutch, should I grease the splines of the input shaft?
I have cleaned bell housing, pulled flywheel, checked endplay, replaced o-ring, replaced main seals on engine and gearbox, new spigot bearing, lubed, new felt grease seal, and a little grease on the end of the input shaft.
Grease on gearbox input shaft
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 16
- Joined: 21 Sep 2019, 22:12
- 80-90 Mem No: 0
- Location: Gloucestershire
Grease on gearbox input shaft
1983 1.9 DG Manual
- ZsZ
- Registered user
- Posts: 1412
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: Grease on gearbox input shaft
Yes the splines should be greased lightly with MoS2 grease.
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th