EMPI dual carb linkage hex bar thread

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
User avatar
totallyconfused
Registered user
Posts: 110
Joined: 27 Mar 2008, 08:16

EMPI dual carb linkage hex bar thread

Post by totallyconfused »

Hi,

Does anyone know what thread size (diameter and pitch) the two bolts that screw into the hex bar on an EMPI dual carb linkage hex bar is?

Trying to get a couple of lock nuts. The pitch on the ball joint adjusters seems quite fine.


I do not have any lock nuts, so tried to order some. No joy. Guessing it's easier to simply order two lock nuts if you know what size and pitch thread you need. ☺️

Many thanks.
1981 - Aircooled 1600 Fire Bus.

Not a camper, Not a pop top, Not Nato Green, its a German Firebus!

User avatar
Aidan
Trader
Posts: 6522
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: EMPI dual carb linkage hex bar thread

Post by Aidan »

ask the supplier, they should know

User avatar
totallyconfused
Registered user
Posts: 110
Joined: 27 Mar 2008, 08:16

Re: EMPI dual carb linkage hex bar thread

Post by totallyconfused »

Hi Aidan,

Thanks for your reply. I have contacted a couple, am still waiting for a reply.

Just wondered if anyone on here knew so I could get the nuts myself?

Thanks.
1981 - Aircooled 1600 Fire Bus.

Not a camper, Not a pop top, Not Nato Green, its a German Firebus!

Post Reply