Page 1 of 1
Vacuum hose top of 1.9dg
Posted: 14 Sep 2020, 19:21
by 100leelee
Hi
The servo vacuum hose...
Brickwerks have none..
Anyone else sourced this hose or used a substitute?
Thanks
Re: Vacuum hose top of 1.9dg
Posted: 14 Sep 2020, 19:34
by Mocki
Which bit do you mean, the short bit between the manifold and the plastic pipe from front to back ?
or this bit
https://www.ebay.co.uk/itm/173664278338
Re: Vacuum hose top of 1.9dg
Posted: 14 Sep 2020, 19:49
by 100leelee
The short piece that’s braided kind of..
Mine looks decidedly tired...
I know normal hose might collapse so would prob need some kind of reinforcement..
Re: Vacuum hose top of 1.9dg
Posted: 14 Sep 2020, 19:53
by Aidan
I think he means the 175mm length of reinforced hose that replaces the braided reinforced rubber hose
this should do the job, 12.7mm i.d. should be okay fit, the original is 12mm i.d. and 3.5mm wall thickness, keep you going till Brickie gets new stock in
ebay link
Re: Vacuum hose top of 1.9dg
Posted: 14 Sep 2020, 21:26
by 100leelee
Thanks!!