Rear crankcase pulley seal WBX
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 808
- Joined: 19 Jun 2010, 12:53
- 80-90 Mem No: 10165
- Location: coulsdon
Rear crankcase pulley seal WBX
hoping that this detail may be available via EKTA as it is missing in the 'Haynes' manual, DG single pulley are bolted directly to the crankshaft with no seal other than the crankcase oil seal, the Triple pulley for most 2.1 is different having a metal shim and 'O' ring behind the pulley on the crankshaft. is this detail, crankshaft, metal disc, 'O ring' ,pulley. or crankshaft, 'O ring' metal disc, pulley. first option seems to make sense, but wanted to check. TIA.
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw Madison kit
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw Madison kit
- Aidan
- Trader
- Posts: 6556
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Rear crankcase pulley seal WBX
first one but you won't be disturbing the disc which vw call the oil thrower or oil thrust ring
-
- Registered user
- Posts: 808
- Joined: 19 Jun 2010, 12:53
- 80-90 Mem No: 10165
- Location: coulsdon
Re: Rear crankcase pulley seal WBX
Thanks Aidan, just planning for later, it's been a couple of years since I removed the crank and bearings
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw Madison kit
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw Madison kit