Aircooled knocking.. Now top end Rebuild
Moderators: User administrators, Moderators
- Davegrohl99
- Registered user
- Posts: 190
- Joined: 10 Jan 2019, 14:57
- 80-90 Mem No: 16802
- Location: Offaly, Ireland
Aircooled knocking.. Now top end Rebuild
After a recent trip home it developed this noise.
I drive it yesterday no knocking at idle when started drive for 20 min came back to this.
Any ideas would be great.
2.0 CU engine.
https://youtu.be/zQINoToktV8
Sent from my SM-N950F using Tapatalk
I drive it yesterday no knocking at idle when started drive for 20 min came back to this.
Any ideas would be great.
2.0 CU engine.
https://youtu.be/zQINoToktV8
Sent from my SM-N950F using Tapatalk
Last edited by Davegrohl99 on 05 Aug 2020, 13:59, edited 1 time in total.
1981 Westfalia 2.0 CU engine.
1971 Early Bay Microbus.
1971 Early Bay Microbus.
Re: Aircooled knocking
That doesn’t sound great. I know mine knocked 2.0cu when it’s been left a while to do with the hydraulic rappers losing pressure. Maybe worth checking the valve train.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Davegrohl99
- Registered user
- Posts: 190
- Joined: 10 Jan 2019, 14:57
- 80-90 Mem No: 16802
- Location: Offaly, Ireland
Re: Aircooled knocking
I was on a trip over the weekend and it never missed a beat. 5 miles from home this happened.
I added about 300ml of oil and drove home slowly.
Yesterday I started it up and no problems or knocking.
It is slightly leaking oil but I manage the oil level and check start of each day. It's not gushing out put noticable after say 500 miles driving.
Sent from my SM-N950F using Tapatalk
I added about 300ml of oil and drove home slowly.
Yesterday I started it up and no problems or knocking.
It is slightly leaking oil but I manage the oil level and check start of each day. It's not gushing out put noticable after say 500 miles driving.
Sent from my SM-N950F using Tapatalk
1981 Westfalia 2.0 CU engine.
1971 Early Bay Microbus.
1971 Early Bay Microbus.
-
- Trader
- Posts: 2593
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: Aircooled knocking
How much oil is in it , sounds big end maybe
- Davegrohl99
- Registered user
- Posts: 190
- Joined: 10 Jan 2019, 14:57
- 80-90 Mem No: 16802
- Location: Offaly, Ireland
Re: Aircooled knocking
Its half way between empty and full on the stick..
Sent from my SM-N950F using Tapatalk
Sent from my SM-N950F using Tapatalk
1981 Westfalia 2.0 CU engine.
1971 Early Bay Microbus.
1971 Early Bay Microbus.
-
- Registered user
- Posts: 1911
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: Aircooled knocking
Nice Aircooled diesel you have there.
I probably wouldn't drive it til you get that sorted. It's not going to go away, will no doubt get worse.
I probably wouldn't drive it til you get that sorted. It's not going to go away, will no doubt get worse.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
- tobydog
- Registered user
- Posts: 1381
- Joined: 07 Mar 2009, 21:03
- 80-90 Mem No: 6484
- Location: Near Saarfend, Essex
Re: Aircooled knocking
When did it last have an oil change and with what oil?
Knowledge is power
1970 CU
1970 CU
- Davegrohl99
- Registered user
- Posts: 190
- Joined: 10 Jan 2019, 14:57
- 80-90 Mem No: 16802
- Location: Offaly, Ireland
Re: Aircooled knocking
Less than 1500km full service with just standard 20W50 mineral oil from Brickwerks.
Sent from my SM-N950F using Tapatalk
Sent from my SM-N950F using Tapatalk
1981 Westfalia 2.0 CU engine.
1971 Early Bay Microbus.
1971 Early Bay Microbus.
- sarran1955
- Registered user
- Posts: 1444
- Joined: 11 Mar 2009, 18:51
- 80-90 Mem No: 6754
- Location: 6, les Hauts de Sarran 19800, Sarran ,Limousin ,FRANCE
Re: Aircooled knocking
Hello,
You have a PM
Cordialement,
You have a PM
Cordialement,
- Davegrohl99
- Registered user
- Posts: 190
- Joined: 10 Jan 2019, 14:57
- 80-90 Mem No: 16802
- Location: Offaly, Ireland
Re: Aircooled knocking
I'm going to drain the oil and inspect for metal,cut the filter open and inspect. I'll check the rockers after that.
Looks like camping is over for the year
Sent from my SM-N950F using Tapatalk
Looks like camping is over for the year
Sent from my SM-N950F using Tapatalk
1981 Westfalia 2.0 CU engine.
1971 Early Bay Microbus.
1971 Early Bay Microbus.
- Davegrohl99
- Registered user
- Posts: 190
- Joined: 10 Jan 2019, 14:57
- 80-90 Mem No: 16802
- Location: Offaly, Ireland
Re: Aircooled knocking
So after trying to adjust the tappets found that it was completely locking between TDC and 180 degrees.
The decision was made to drip the engine and in fairness 1 hour had her in the back if my van.
Maybe a blessing in disguise as the clutch was drenched in oil. Rear main seal must be caput.
Any who time to take the heads off see what's happening and replace anything perishable.
Sent from my SM-N950F using Tapatalk
The decision was made to drip the engine and in fairness 1 hour had her in the back if my van.
Maybe a blessing in disguise as the clutch was drenched in oil. Rear main seal must be caput.
Any who time to take the heads off see what's happening and replace anything perishable.
Sent from my SM-N950F using Tapatalk
1981 Westfalia 2.0 CU engine.
1971 Early Bay Microbus.
1971 Early Bay Microbus.
- sarran1955
- Registered user
- Posts: 1444
- Joined: 11 Mar 2009, 18:51
- 80-90 Mem No: 6754
- Location: 6, les Hauts de Sarran 19800, Sarran ,Limousin ,FRANCE
Re: Aircooled knocking
Hello,
If it really won't turn over....
Then we are looking at a dropped valve...
Cordialement,
If it really won't turn over....
Then we are looking at a dropped valve...
Cordialement,
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: Aircooled knocking
Davegrohl99 wrote: ↑11 Jul 2020, 13:24 So after trying to adjust the tappets found that it was completely locking between TDC and 180 degrees.
Was the dizzy still installed ?
if not then it could be the dizzy drive gear causing that problem as they try to rise up the shaft.
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
- Davegrohl99
- Registered user
- Posts: 190
- Joined: 10 Jan 2019, 14:57
- 80-90 Mem No: 16802
- Location: Offaly, Ireland
Re: Aircooled knocking
We have a winner
Looks like the valve guide decide to part ways and played a game of ping pong with the piston and head.
Also when taking the heads off a hydraulic tappet just fell out?
Enough torture for one day so the next question is what to do.
I want to keep the camper original but would like a little more power and seen as it's all apart what does everyone recommend?
Keep stock and put back to OE or are there any modifications worth doing ie larger pistons or the likes that anyone recommends?
Sent from my SM-N950F using Tapatalk
Looks like the valve guide decide to part ways and played a game of ping pong with the piston and head.
Also when taking the heads off a hydraulic tappet just fell out?
Enough torture for one day so the next question is what to do.
I want to keep the camper original but would like a little more power and seen as it's all apart what does everyone recommend?
Keep stock and put back to OE or are there any modifications worth doing ie larger pistons or the likes that anyone recommends?
Sent from my SM-N950F using Tapatalk
1981 Westfalia 2.0 CU engine.
1971 Early Bay Microbus.
1971 Early Bay Microbus.
- sarran1955
- Registered user
- Posts: 1444
- Joined: 11 Mar 2009, 18:51
- 80-90 Mem No: 6754
- Location: 6, les Hauts de Sarran 19800, Sarran ,Limousin ,FRANCE
Re: Aircooled knocking
Hello,
Looks like you are going down this route...
viewtopic.php?f=37&t=169431
You have dished pistons, so low compression, 95 RON petrol...
Definately not worth oversize pistons and barrels...
Air-Cooled Bliss..
Looks like you are going down this route...
viewtopic.php?f=37&t=169431
You have dished pistons, so low compression, 95 RON petrol...
Definately not worth oversize pistons and barrels...
Air-Cooled Bliss..