Hello.
I am just about to refit my fuel tank after refurbishing everything.
I have had overflow fuel leak issues when I fill up with a full tank of fuel and lived with petrol smells for some time now, so I have replaced all the grommets, float, breather pipe and valves etc.
However the filler neck breather pipe union was snapped in the past and I cannot source a new one.
Does anyone know where I can obtain one of these adapters or can the pipe be inserted directly into the grommet in the fuel tank as has been suggested by one supplier?
I have looked in all the usual places to source a replacement with no luck as yet - or is this going to be a task for 3d printing?
Tx.
Fuel filler neck breather - snapped white pipe union
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 17
- Joined: 06 Nov 2005, 18:46
- 80-90 Mem No: 9334
- Location: Brighton
Fuel filler neck breather - snapped white pipe union
T25 1984 Petrol 1.9 DG - Pierburg 2E3
- ZsZ
- Registered user
- Posts: 1409
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: Fuel filler neck breather - snapped white pipe union
As I can see on the ETKA pics the breather is attached to a nipple on the filer neck.
So either get an used filler neck with breather, or you can try something DIY. Like glueing in a piece of pipe or something.
https://volkswagen.7zap.com/en/rdw/typ+ ... 201-31000/
So either get an used filler neck with breather, or you can try something DIY. Like glueing in a piece of pipe or something.
https://volkswagen.7zap.com/en/rdw/typ+ ... 201-31000/
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
-
- Registered user
- Posts: 17
- Joined: 06 Nov 2005, 18:46
- 80-90 Mem No: 9334
- Location: Brighton
Re: Fuel filler neck breather - snapped white pipe union
Hey ZsZ.
Thanks for your response and your advice, the EKTA plan is super useful.
I have been digging for second hand parts and found one, the issue I have is the union with breather pipe at the fuel tank.
I am going to try and sleeve it with a plastic adapter and see if that works.
Tx.
Nik.
Thanks for your response and your advice, the EKTA plan is super useful.
I have been digging for second hand parts and found one, the issue I have is the union with breather pipe at the fuel tank.
I am going to try and sleeve it with a plastic adapter and see if that works.
Tx.
Nik.
T25 1984 Petrol 1.9 DG - Pierburg 2E3