Page 1 of 1

Clutch and pressure plate wear on a 16TD jx

Posted: 24 Jun 2020, 08:35
by Rdav1s
Hi all,

I'm changing the pilot bearing at the moment and have removed the clutch h to get at it. As I haven't seen a new clutch, I'm not sure how worn mine is. So any help would be appreciated before I buy a new one and throw away a perfectly serviceable unit.
I've messure the depth to the river as 1.5mm. There are no deep (>.3mm) on either the clutch or plate.

Many thanks, RobImageImageImage

Sent from my SM-G390F using Tapatalk