Hi, does anyone know what a solid shaft rocker arm end bolts should be torqued to?
Not the shaft to cylinder head torque setting, but the bolts on the end of the solid shaft.
Many thanks. [THUMBS UP SIGN]
Sent from my Pixel 3a using Tapatalk
Solid Rocker Shaft Torque Settings
Moderators: User administrators, Moderators
- totallyconfused
- Registered user
- Posts: 110
- Joined: 27 Mar 2008, 08:16
Solid Rocker Shaft Torque Settings
1981 - Aircooled 1600 Fire Bus.
Not a camper, Not a pop top, Not Nato Green, its a German Firebus!
Not a camper, Not a pop top, Not Nato Green, its a German Firebus!
- totallyconfused
- Registered user
- Posts: 110
- Joined: 27 Mar 2008, 08:16
Re: Solid Rocker Shaft Torque Settings
FYI....have been told that the shafts should be torqued 14-18 foot lbs.
Cheers.
Sent from my Pixel 3a using Tapatalk
Cheers.
Sent from my Pixel 3a using Tapatalk
1981 - Aircooled 1600 Fire Bus.
Not a camper, Not a pop top, Not Nato Green, its a German Firebus!
Not a camper, Not a pop top, Not Nato Green, its a German Firebus!