Just removed an old crank pulley bolt and installed a new crank seal.
As i was about to torque the CP bolt up to spec, i noticed the instructions said to oil the bolt. Since it's an important part, i thought i'd see what other people on here have used/recommend? I have 3in1 lithium grease, copper anti seize, moly grease, GT85, engine oil etc. Bentley said to use "oil" too.
Also, my 1Y didn't have a washer on the CP bolt. Bentley says it should have one.
Oh, and check out my Crank locking tool/spade
Cheers.
Crank Pulley Bolt Lubricant and Check out my Spade
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 327
- Joined: 03 May 2017, 00:19
- 80-90 Mem No: 16820
- Location: Cheshire
Crank Pulley Bolt Lubricant and Check out my Spade
1984 Autosleeper, pop-top, 1.7 KY, 5-Speed