Hi
Does anyone have any photos of where how the Eberspacher is connected on a Profi?
Maybe over the gearbox under the seat??
Thanks
Simon
Dehler Profi Eberspacher placement....???
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 305
- Joined: 09 May 2013, 14:43
- 80-90 Mem No: 12044
- Location: Launceston, Cornwall
Dehler Profi Eberspacher placement....???
1987 Westy Joker 1.6TD
1987 Dehler Profi 2+2
1988 Syncro RHD panel
1987 Dehler Profi 2+2
1988 Syncro RHD panel
- Oldiebut goodie
- Registered user
- Posts: 7293
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Dehler Profi Eberspacher placement....???
Connected to what?
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 305
- Joined: 09 May 2013, 14:43
- 80-90 Mem No: 12044
- Location: Launceston, Cornwall
Re: Dehler Profi Eberspacher placement....???
The fuel tank, how the hot air is delivered inside the van, how the exhaust leaves the unit, where the box is sited. From what I can tell the space used by Westfalia for the Eberspacher is used by Dehler for the 2 water tanks so presumably they had a different solution?
1987 Westy Joker 1.6TD
1987 Dehler Profi 2+2
1988 Syncro RHD panel
1987 Dehler Profi 2+2
1988 Syncro RHD panel
- Oldiebut goodie
- Registered user
- Posts: 7293
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Dehler Profi Eberspacher placement....???
You only need a 5" x 4" space underneath the vehicle for the combustion air and exhaust pipes so a heater can go wherever it will fit internally and externally. You will need roughly 18" x 6" internally for a Webasto Air Top 2000 heater. Without knowing your particular internal furniture layout and clear spaces underneath it would be hard to suggest the best place.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
- Registered user
- Posts: 305
- Joined: 09 May 2013, 14:43
- 80-90 Mem No: 12044
- Location: Launceston, Cornwall
Re: Dehler Profi Eberspacher placement....???
Thanks, the spaces between the sills and the chassis rails are filled by the waste water tanks! I was hoping for feedback from a member who may have or have had one, ideally with pics! I would guess over the gearbox?
1987 Westy Joker 1.6TD
1987 Dehler Profi 2+2
1988 Syncro RHD panel
1987 Dehler Profi 2+2
1988 Syncro RHD panel
- Mocki
- Membership Admin
- Posts: 16965
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: Dehler Profi Eberspacher placement....???
Or under the glove box ?
My eberspácher Dl1c has been there for years ....
My eberspácher Dl1c has been there for years ....
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
-
- Registered user
- Posts: 305
- Joined: 09 May 2013, 14:43
- 80-90 Mem No: 12044
- Location: Launceston, Cornwall
Re: Dehler Profi Eberspacher placement....???
Just in case anyone else has a van without a heater fitted it does or at least can be fitted under the rear seat over the gearbox. I had a donor from a Westy but by removing one of the brackets and drilling the other was able to suspend it using 4 cotton reels. Not a practical solution for non Dehlers without the cutaway and no idea what the syncro versions did but quite a neat space saving solution....!
1987 Westy Joker 1.6TD
1987 Dehler Profi 2+2
1988 Syncro RHD panel
1987 Dehler Profi 2+2
1988 Syncro RHD panel